Winland Sensors Motor Controls

Winland Sensors and Motor Controls
Call or Email for Price Info

Winland Electronics provides a comprehensive range of design, engineering and Electronic Manufacturing Services (EMS) to Original Equipment Manufacturing (OEM) companies in a wide variety of industries. Our services are scaleable and we provide you with multiple entry points for product design and manufacturing services, allowing you to choose the appropriate services to meet your unique requirements.

Winland Electronics Product Line:

Sensors

1106 Standard Temperature Sensor

M-001-081 SS High Temperature Thermistor Probe

M-001-082 SS Low Temperature Thermistor Probe

VAL-1 Vehicle-Alert Standard System

WB-200 Waterbug

1040 Standard Water Probe

1041 Under Carpet Water Probe

WB-800 Waterbug: 8-Zones

HA-1 Humid-Alert

MTA-1 Mechanical Temp Alert

1012 Series Vehicle Sensor Probe & Cable
Probes available with 10’, 100’, 200’, 350’, 500’ & 1000’ lengths of cable. Maximum run is 2,500’

1111 Wall Transformer

1170 Vehicle-Alert Console

1173 Vehicle-Alert Console and Transformer

1175 Remote Annunciator (12 VDC)

W1005350 Additional Cable for Vehicle Alert: 350 Feet

W1005 Additional Cable for Vehicle Alert

W1005500 Additional Cable for Vehicle Alert: 500 Feet

Discontinued Winland Electronics Products:

Digital Temp & Humidity Alarm, 4-zone (DPM-4)
[PN# DISCONTINUED]
See NEW product EnviroAlert EA200 & EA400

Digital Temp Alert (DTA-1)
[PN# DISCONTINUED]
See NEW product EnviroAlert EA200 & EA400

Digital Temp-Alert (TA-2HLD)
[PN# DISCONTINUED ]
See NEW product EnviroAlert EA200 & EA400

Digital Temp-Alert w/Buzzer (TA-3HLD)
[PN# DISCONTINUED]
See NEW product EnviroAlert EA200 & EA400

Digital TempAlert 4-zone (DTA-4)
[PN# DISCONTINUED]
See NEW product EnviroAlert EA200 & EA400

Electronic Temp Alert (UTA-1)
[PN# DISCONTINUED]
See NEW product EnviroAlert EA200 & EA400

EnviroAlert (EA200)
[PN# M-001-0079]
NEW The EA200 & EA400 will be replacing the current UTA-1, TA-2HLD, TA-3HLD, DTA-1, DTA-4 and also the DPM-4. The EnviroAlert will be available in August of 2005

EnviroAlert (EA400)
[PN# M-001-0080]
NEW The EA200 & EA400 will be replacing the current UTA-1, TA-2HLD, TA-3HLD, DTA-1, DTA-4 and also the DPM-4. The EnviroAlert will be available in August of 2005

Humid-Alert (HA-1)
[PN# 1190]
The HA-1 is a stand-alone humidity-monitoring device requiring no power for operation.

Mechanical Fixed Temp Alert (TA-40)
[PN# 1100]
The simple low-cost TA-40 requires no power for operation.

Mechanical Temp Alert (TA-1)
[PN# 1014]
The economical TA-1 requires no power for operation.

Mechanical Temp Alert (TA-2HL)
[PN# 1039]
The economical TA-2HL requires no power for operation.

Mechanical Temp Alert (MTA-1)
[PN# 1200]
The professional looking MTA-1 requires no power for operation.

Winland Electronics Motor Controls

WMC120 Series

M-001-0045 Mounting foot kit
Mounting foot kit for WMC120 & WMC140 motor control Provides for easy motor control back panel mounting. Consists of: two (2) Aluminum "Z" type mounting brackets and four (4) #6-32 screws in a zip-seal bag.

M-001-0031 WMC120-0120060-J4W
Motor Control - 12vdc, 6 amp, 1-direction, open
Unit is a PWM open board design with integrally mounted aluminum plate heat sink, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 6-amp electronic current protection and conformal-coated board finish.

M-001-0035 WMC120-0240060-J4W
Motor Control - 24vdc, 6 amp, 1-direction, open
Unit is a PWM open board design with integrally mounted aluminum plate heat sink, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 6-amp electronic current protection and conformal-coated board finish.

M-001-0036 WMC120-0240180-M5W
Motor control - 24vdc, 18 amp, 1-direction, enclosed
Unit is an enclosed PWM design with aluminum heat base, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 18-amp electronic current protection and conformal-coated board finish.

M-001-0037 WMC120-0120180-M5W
Motor Control - 12vdc, 18 amp, 1-direction, enclosed
Unit is an enclosed PWM design with aluminum heat base, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 18-amp electronic current protection and conformal-coated board finish.

M-001-0041 WMC120-0120180-L4W
Motor Control - 12vdc, 18 amp, 1-direction, open
Unit is an open board PWM design with aluminum heat sink base, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 18-amp electronic current protection and conformal-coated board finish.

M-001-0042 WMC120-0240180-L4W
Motor Control - 24vdc, 18 amp, 1-direction, open
Unit is an open board PWM design with aluminum heat sink base, reverse polarity protection, sealed-board mounted speed adjust potentiometer, 18-amp electronic current protection and conformal-coated board finish.

WMC 140 Series

M-001-0045 Mounting foot kit
Mounting foot kit for WMC120 & WMC140 motor control Provides for easy motor control back panel mounting. Consists of: two (2) Aluminum "Z" type mounting brackets and four (4) #6-32 screws in a zip-seal bag.

M-001-0063 WMC140-0120270-L0W
Motor Control - 12vdc,27 amp, bi-directional, open w/o pot. Unit is a PWM open board design with aluminum heat sink mounting base, reverse polarity protection, external speed potentiometer input, adjustable electronic current foldback, bi-directional control input and conformal-coated board finish.

M-001-0066 WMC140-0240270-L0W
Motor Control - 24vdc, 27amp, bi-directional, open w/o pot. Unit is a PWM open board design with aluminum heat sink mounting base, reverse polarity protection, external speed potentiometer input, adjustable electronic current foldback, bi-directional control input and conformal-coated board finish.

Winland Electronics Motor Control Accessories

M-001-0045 Mounting foot kit
Mounting foot kit for WMC120 & WMC140 motor control Provides for easy motor control back panel mounting. Consists of: two (2) Aluminum "Z" type mounting brackets and four (4) #6-32 screws in a zip-seal bag.