|
Corby has been opening doors for over 30 years.
Beginning with the very first digital keypad in 1972, Corby products and
capabilities have advanced into the access control arena. Today, these advanced
skills and products are being used to meet the demands of thousands of companies
throughout the world.
Corby Security Access Control Systems
21-1000 1000 System 1 - Single-door Access Control System - 250 users, 50 event
buffer, 3 time schedules, forced entry, door ajar, request-to-exit, serial
printer output, non-volatile EEPROM - 1 main relay, 1 aux relay - Program with
built-in keypad & LED display or full duplex RS232 using PC or VDT - Keypad, bar
code, magnetic stripe, 30-bit Weigand, 30-bit prox, data chip - Requires 48-4301
for data chip - Includes transformer, mounting hardware, 50' eight conductor
wire - Does not support 26-bit cards - Cabinet: 9' W x 12" H x 4.5" D (229mm x
305mm x 114mm)
22-2003 2003 System 2 - Single-door Access Control System - On-site programming
w/built-in keypad - RS-232 port for local programming & monitoring w/VDT or PC
or printing - Up to 424 users per panel - 8 time schedules, anti-passback, temp
users, holidays, door ajar, forced entry, emergency drop inputs, request-to-exit
input, zone input - 1 main relay, 1 aux relay & 1 voltage output - Supports
keypads, data chip, 26 & 30-bit Wiegand & proximity, mag stripe or bar code -
Call Corby to purchase 2nd door option - Upgradeable to networked System 2000 -
54-8021 RS-232 to Ethernet Adapter available - Cabinet: 11" W x 15.5" H x 4.5" D
(279mm x 394mm x 114mm)
22-2016 2016 System 2 - Two-door Access Control System - Expandable to 16 doors
- On-site programming w/ built-in keypad - RS-232 port for local or remote
programming & monitoring w/ VDT or PC or printing - 2700>4090 users per panel,
16 time schedules, anti-passback, temp users, holidays, door-ajar, forced-entry,
time-cancel, emergency drop inputs, request-to-exit inputs, zone inputs - 2 main
relays, 2 aux relays & 2 voltage outputs - Supports keypads, data chips, 26 &
30-bit Wiegand & proximity, mag stripe or bar code - Upgradeable to networked
System 2000 - 54-8021 RS-232 to Ethernet Adapter available - Cabinet: 11" W x
15.5" H x 4.5" D (279mm x 394mm x 114mm)
22-2018 2018 Data Chip Programming Wand - System 2 - Use to program data chips
into any System 2 Access Control System - The wand plugs into a RJ-11 jack
connection on the system motherboard - Metal contact surface at head of probe
guides data chip for quick & easy enrollment - Wand handle made from
lightweight, durable plastic - Compatible w/ iButton - 3' (1m) cable with RJ-11
plug - Wand: 0.75" Diameter x 4" L (19mm x 102mm)
25-4000 4000 System 5 Full-Featured - Master Access Control System panel -
Supports 4 doors - Expand to 8 doors by adding a 25-4009 Slave panel - 750
users, 64 time zones, 16 holidays, 250 event buffer, door-ajar, request-to-exit,
forced entry, relay time-cancel, anti-passback, RS-232 output - 4 main relays &
1 aux relay - Supports keypads, data chips (requires 54-4301 for data chip), 26
& 30-bit Wiegand & proximity, mag stripe or bar code (requires 54-4141 for card
technologies) - Can program w/ a VDT or PC - Includes serial printer, video
display terminal, 52-4020 keypad, backup/restore CD-ROM, battery & transformer -
Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
25-4005 4005 System 5 Partial-Featured - Same as full-featured System 5, but
does not include the video display terminal or serial printer - See part
#25-4000 for full system details - Usually used with existing PC for programming
& printing - Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
25-4009 4009 System 5 Expansion Panel - Also called a "slave" control unit -
Connects to a master panel (25-4000) via 3 shielded wires - Increases total
system capacity to 8 doors, 8 zones and 1 aux - All functions of the slave panel
are the same as the master, except the master is used for all programming
functions - Telecommunications Board (41-4021) not included nor required with
slave expansion panel - Includes battery and transformer - Cabinet: 11" W x
15.5" H x 4.5" D (279mm x 394mm x 114mm)
26-4405 4405 System 10 Door Port Module (DPM) - 1 DPM is required for each 4
Doors - Expandable to 32 DPMs or 128 doors - 4 main relays and 1 aux relay -
Supports 2000 users, 8 time schedules, 64 time zones, 16 holidays, RS-232
output, door ajar, forced entry, relay time cancel, request-to-exit, zone
monitoring, anti-passback - Supports keypads, data chips (requires 54-4301 for
data chip), 26 & 30-bit Wiegand, 26 & 30-bit proximity, magnetic stripe, bar
code (requires 54-4141 for cards technologies) - Requires: 26-4450 PC, 26-4406
digi board, 26-4410 software - Includes battery, transformer, surge protector -
Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
Corby Industries Communications Board Systems
26-4406 4406 Communications Board for System 10 - Four (26-4406) boards can be
installed for the full compliment of 32 DPMs & 128 doors - Includes 8-channel
cable, micropeeper RS-232 LED monitor/troubleshooter, null modem, software -
4.75" W x 8.437" L x 0.75" H (95mm x 215mm x 19mm)
26-4407 4407 Communications Board for System 10 - Board only - Does not include
8-channel cable - Four (26-4406) boards can be installed for the full compliment
of 32 DPMs & 128 doors - 4.75" W x 8.437" L x 0.75" H (95mm x 215mm x 19mm )
26-4409 4409 8-Channel Cable - Cable assembly
only - Use with 26-4406 or 26-4407 System 10 communications board
26-4410 4410 System 10 Software - MS-DOS-based software required to program DPM
(26-4405) via System 10 PC (26-4450) - Software only runs on DOS 6.2 or greater
- Dual communicating software sends commands to panel (DPM) & receives event
updates from panels for storage to hard drive - Used for programming,
communications, recording of events, generating customized reports &
administrating data base - Includes hardware & software manuals & disks
26-4440 4440 System 10 Computer - Tower - Tower with keyboard only - Does not
include monitor or communications board - Replacement parts for System 10 PC
26-4450 - 90-day warranty - Tower: 7.3" W x 16.7" L x 18.3" H (185mm x 424mm x
465mm)
26-4441 4441 System 10 Computer - Monitor - Monitor only - Does not include
keyboard - Replacement parts for System 10 PC 26-4450 - Monitor: 19" W x 18" L x
17" D (483mm x 457mm x 432mm)
26-4450 4450 System 10 Computer - Mini-Tower with keyboard, MS-DOS, floppy
drive, 17" color monitor - Supports 128 doors - Requires 26-4406 communications
board & 26-4410 software - CORBY can preload software & install digi board -
Also available loaded with system 5 software @ customer's request - 90-day
warranty - Tower: 7.3" W x 16.7" L x 18.3" H (185mm x 424mm x 465mm) Monitor:
19" W x 18" L x 17" D (483mm x 457mm x 432mm)
28-2000 2000 System 2000 - Windows-based Access Control System - Includes
Network Interface Controller (NIC) & software - Requires PC for programming & at
least one control panel (28-2025) for access control - PC communicates with NIC
via serial port - NIC communicates with all control panels via four RS-485
channels - Each channel communicates with up to 31 panels for a total of 248
doors - Includes battery, transformer, loopback tester, serial cable - See sales
sheet for complete list of features, maximum users & compatible products -
Cabinet: 9" W x 12" L x 4.5" D (229mm x 305mm x 114mm)
28-2017 2017 Data Chip Programming Wand - System 2000 - Use to program data
chips into the System 2000 PC - This wand is identical to the 22-2018 but
includes a RJ-11>RS232/serial adapter - PC must have an available serial port -
Metal contact surface at head of probe guides data chip for quick & easy
enrollment - Wand handle made from lightweight, durable plastic - Compatible w/
iButton - 3' (1m) cable with RJ-11 plug - Wand: 0.75" Diameter x 4" L (19mm x
102mm)
28-2025 2025 Control Panel - System 2000 - See part #28-2000 for full system
details - Complete hardware support for 2 doors, 2 main relays, 2 aux relays, 2
voltage outputs, emergency drop inputs, request-to-exit inputs and zone inputs -
Terminal inputs support all card technologies, data chips and keypads -
Fail-safe distributed system - Includes battery and transformer - Cabinet: 11" W
x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
Corby Industries Proximity Readers
31-4079 4079 Proximity Reader - 26-Bit - Classic - Indoor-Outdoor - Reads 26-bit
Class IM cards up to 5" (127mm) under ideal conditions - Flex Pass System -
4-16VDC - Tri-color LED - Audio tone - One of our most popular readers - Use
only with 26-bit Class IM cards - Works with Corby Systems 2, 4, 5, 10 & 2000 -
Not compatible with Corby System 1 - Will retrofit to classic-style Wiegand
sized swipe readers - Does not read 30-bit UltraSecure Class IM cards - Color:
black - Also available: gray, white, beige (S.O.) - 2.3" x 5.3" x 0.8" (58mm x
135mm x 20mm) [Classic]
31-4080 4080 Proximity Reader - 26-Bit - Mullion Style - Indoor-Outdoor -
Slim-line, fits most narrow door frames - Reads 26-bit Class IM cards up to 4"
(100mm) under ideal conditions - Flex Pass System - 4-16VDC - Tri-color LED -
Audio tone - Use only with 26-bit Class IM cards - Works with Corby Systems 2,
4, 5, 10 & 2000 - Not compatible with Corby System 1 - Does not read 30-bit
Class IM UltraSecure™ cards - Color: black only - 1.7" x 5.5" x 0.7" (43mm x
140mm x 17mm) [Legacy]
31-4081 4081 Proximity Reader - 26-Bit - Wall Plate Size - Indoor-Outdoor -
Reads 26-bit Class IM cards up to 4" (100mm) under ideal conditions - Flex Pass
System - 4-16VDC - Tri-color LED - Audio tone - Use only with 26-bit Class IM
cards - Works with Corby Systems 2, 4, 5, 10 & 2000 - Not compatible with Corby
System 1 - Does not read 30-bit Class IM UltraSecure™ cards - Color: black -
Size: Standard wall plate size - 3" x 4.5" x 0.7" (76mm x 114mm x 17mm) [Legacy]
31-4082 4082 Proximity Reader - 26-Bit - Mid-Range - Indoor-Outdoor - Reads most
26-bit Class IM cards up to 12" (305mm) under ideal conditions - Flex Pass
System - 4-14VDC - Tri-color LED - Audio tone - Use only with 26-bit Class IM
cards - Works with Corby Systems 2, 4, 5, 10 & 2000 - Not compatible with Corby
System 1 - Does not read 30-bit Class IM UltraSecure™ cards - Color: black -
Also available: gray, white, beige (S.O.) - 5.1" x 6.1" x 1.1" (130mm x 155mm x
28mm) [Arch]
31-4083 4083 Proximity Reader - 26-Bit - Long-Range - Indoor-Outdoor - Reads
most 26-bit Class IM cards up to 28" (711mm) under ideal conditions - Flex Pass
System - 12VDC @ 1.2A - 24VDC @ 900mA - Oversized tri-color LED - Audio tone -
Use only with 26-bit Class IM cards - Works with Corby Systems 2, 4, 5, 10 &
2000 - Not compatible with Corby System 1 - Does not read 30-bit Class IM
UltraSecure cards - Color: black only - 11.2" x11.2" x 1.8" (282mm x 284mm x
46mm) [Arch]
31-4085 4085 Proximity Card - 26-Bit - Class IM card - Use ONLY with any Class
IM 26-bit prox reader - Works with Corby Systems 2, 4, 5, 10 & 2000 - Not
compatible with Corby System 1 - Class IM UltraSecure™ 30-bit readers cannot
read this card - Rugged, long-wearing design - Pre-punched slot makes it easy to
hang from lanyard or key retractor - Credit Card size: 2.13" x 3.38" x 0.065"
(54mm x 86mm x 2mm)
31-4086 4086 Proximity Keyfob - 26-Bit - Class IM card - Use ONLY with any Class
IM 26-bit prox reader - Works with Corby Systems 2, 4, 5, 10 & 2000 - Not
compatible with Corby System 1 - Class IM UltraSecure™ 30-bit readers cannot
read this card - Rugged, double-sealed construction - Long-wearing design -
Small, lightweight & easy to use - Built to withstand harsh operating
environments - Re-enforced hole ensures years of use - Dimensions: 1.197" x
1.725" x 0.215" (30mm x 44mm x 5mm)
31-4087 4087 Proximity Card - 26-Bit - Photo ID - Class IM card - Use ONLY with
any Class IM 26-bit prox reader - Works with Corby Systems 2, 4, 5, 10 & 2000 -
Not compatible with Corby System 1 - Class IM UltraSecure™ 30-bit readers cannot
read this card - Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm)
32-4177 4177 Proximity Reader - UltraSecure™ 30-Bit - Classic - Indoor-Outdoor -
Reads 30-bit Class IM UltraSecure™ cards up to 5" (127mm) under ideal conditions
- Flex Pass System - 4-16VDC - Tri-color LED - Audio tone - One of our most
popular readers - Use only with 30-bit Class IM UltraSecure™ cards - Works with
Corby Systems 1, 2, 4, 5, 10 & 2000 - Will retrofit to classic-style Wiegand
sized swipe readers - Does not read 26-bit Class IM cards - Color: black - Also
available: gray, white, beige (S.O.) - 2.3" x 5.3" x 0.8" (58mm x 135mm x 20mm)
[Classic]
32-4178 4178 Proximity Reader - UltraSecure™ 30-Bit - Mullion Style -
Indoor-Outdoor - Slim-line, fits most narrow door frames - Reads 30-bit Class IM
UltraSecure™ cards up to 4" (100mm) under ideal conditions - Flex Pass System -
4-16VDC - Tri-color LED - Audio tone - Use only with 30-bit Class IM UltraSecure™
cards - Works with Corby Systems 1, 2, 4, 5, 10 & 2000 - Does not read 26-bit
Class IM cards - Color: black only - 1.7" x 5.5" x 0.7" (43mm x 140mm x 17mm)
[Legacy]
32-4179 4179 Proximity Reader - UltraSecure™ 30-Bit - Wall Plate Size -
Indoor-Outdoor - Reads 30-bit Class IM UltraSecure™ cards up to 4" (100mm) under
ideal conditions - Flex Pass System - 4-16VDC - Tri-color LED - Audio tone - Use
only with 30-bit Class IM UltraSecure™ cards - Works with Corby Systems 1, 2, 4,
5, 10 & 2000 - Does not read 26-bit Class IM cards - Color: black - Size:
Standard wall plate size - 3" x 4.5" x 0.7" (76mm x 114mm x 17mm) [Legacy]
32-4180 4180 Proximity Reader - UltraSecure™ 30-Bit - Mid-Range - Indoor-Outdoor
- Reads most 30-bit Class IM UltraSecure™ cards up to 12" (305mm) under ideal
conditions - Flex Pass System - 4-14VDC - Tri-color LED - Audio tone - Use only
with 30-bit Class IM UltraSecure™ cards - Works with Corby Systems 1, 2, 4, 5,
10 & 2000 - Does not read 26-bit Class IM cards - Color: black - Also available:
gray, white, beige (S.O.) - 5.1" x 6.1" x 1.1" (130mm x 155mm x 28mm) [Arch]
32-4181 4181 Proximity Reader - UltraSecure™ 30-Bit - Long-Range -
Indoor-Outdoor - Reads most 30-bit Class IM UltraSecure™ cards up to 28" (711mm)
under ideal conditions - Flex Pass System - 12VDC @ 1.2A - 24VDC @ 900mA -
Oversized tri-color LED - Audio tone - Use only with 30-bit Class IM UltraSecure™
cards - Works with Corby Systems 1, 2, 4, 5, 10 & 2000 - Does not read 26-bit
Class IM cards - Color: black only - 11.2" x11.2" x 1.8" (282mm x 284mm x 46mm)
[Arch]
32-4190 4190 Proximity Card - UltraSecure™ 30-Bit - Class IM card - Use ONLY
with any Class IM UltraSecure™ 30-bit prox reader - Works with Corby Systems 1,
2, 4, 5, 10 & 2000 - 26-bit readers cannot read this card - Rugged, long-wearing
design - Pre-punched slot makes it easy to hang from lanyard or key retractor -
Credit Card size: 2.13" x 3.38" x 0.065" (54mm x 86mm x 2mm)
32-4192 4192 Proximity Keyfob - UltraSecure™ 30-Bit - Class IM card - Use ONLY
with any Class IM UltraSecure™ 30-bit prox reader - Works with Corby Systems 1,
2, 4, 5, 10 & 2000 - 26-bit readers cannot read this card - Rugged,
double-sealed construction - Long-wearing design - Small, lightweight & easy to
use - Built to withstand harsh operating environments - Re-enforced hole ensures
years of use - Dimensions: 1.197" x 1.725" x 0.215" (30mm x 44mm x 5mm)
32-4194 4194 Proximity Card - UltraSecure™ 30-Bit - Photo ID - Class IM card -
Use ONLY with any Class IM UltraSecure™ 30-bit prox reader - Works with Corby
Systems 1, 2, 4, 5, 10 & 2000 - Class IM 26-bit readers cannot read this card -
Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm)
33-4302 4302 Data Chip Reader - Indoor - Flush mount - One 12VDC green LED with
6" (152mm) flying leads - Standard size aluminum single-gang plate bearing the
classic Corby logo - Annodized scuff and scratch resistant finish - Long lasting
read head with 12" (304mm) leads - Compatible with iButton - 2.75" W x 4.5" L x
1" D (70mm x 114mm x 25mm)
33-4303 4303 Data Chip Reader - Indoor - Flush mount - One each 12VDC green and
red LEDs with 6" (152mm) flying leads - Standard size aluminum single-gang plate
bearing the classic Corby logo - Annodized scuff and scratch resistant finish -
Long lasting read head with 12" (304mm) leads - Compatible with iButton - 4.5" W
x 2.75" L x 1" D (114mm x 70mm x 25mm)
33-4304 4304 Data Chip Reader - Indoor - Flush mount - One 12VDC green LED with
6" (152mm) flying leads - Standard size aluminum mullion sized plate bearing the
classic Corby logo - Annodized scuff and scratch resistant finish - Long lasting
read head with 12" (304mm) leads - Compatible with iButton - 1.375" W x 3.125" L
x 1" D (35mm x 79mm x 25mm)
33-4305 4305 Data Chip Reader - Indoor - Flush mount - One each 12VDC green and
red LEDs with 6" (152mm) flying leads - Standard size aluminum mullion sized
plate bearing the classic Corby logo - Annodized scuff and scratch resistant
finish - Long lasting read head with 12" (304mm) leads - Compatible with iButton
- 1.375" W x 3.125" L x 1" D (35mm x 79mm x 25mm)
33-4306 4306 Data Chip Reader - Read head only - 12VDC Green LED included - Low
profile - Single hole mounting 0.315" Diameter (8 mm) - Perfect for OEM
applications or special small footprint installations - 6" (152mm) data wires
attached - Compatible with iButton - 0.83" Diameter x 0.40" H (21mm x 10mm)
33-4307 4307 Data Chip Reader - Indoor/outdoor - Surface mount - One 12VDC
bi-color LED - High impact black ABS plastic mullion sized housing - Virtually
indestructible - Corrosion-proof - Long lasting back-lit read head with 12"
(304mm) leads - Compatible with iButton - 1.5" W x 4" L x 1" D (38mm x 102mm x
25mm)
33-4318 4318 Data Chip - For System 2 or 2000 - Can be mounted to badges, photo
ID cards or any smooth surface - Nearly indestructible - Ultra high security -
Cannot be copied or cloned - Each chip has a unique internal 64-bit serial
number - Use our 33-4323 tape dots to securely attach the chips to any desired
surface - Not for use with Systems 1, 4, 5, 10 & single-door readers - 0.642"
Diameter x 0.126" Thick (15mm x 2mm)
33-4319 4319 Data Chip and Key Fob - For System 2 or 2000 - Nearly
indestructible - Ultra high security - Cannot be copied or cloned - Each chip
has a unique internal 64-bit serial number - Chip is securely mounted on a
rugged stainless steel key fob with Corby logo - Custom logos available - Not
for use with Systems 1, 4, 5, 10 & single-door readers - Chip: 0.642" Diameter x
0.126" Thick (15mm x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x
.38mm)
33-4320 4320 Data Chip and Key Fob - Use with Corby Systems 1, 4, 5, and 10 and
all single-door readers - Special batch codes ensure proper operaton with these
systems - Nearly indestructible - Ultra high security - Cannot be copied or
cloned - Each chip has a unique internal 64-bit serial number - Mounted on a
rugged stainless steel key fob with Corby logo - Custom logos available (S.O.) -
Not for use with Systems 2 and 2000 - Chip: 0.642" Diameter x 0.126" Thick (15mm
x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x .38mm)
33-4321 4321 Data Chip - For use with all Corby Systems 1, 4, 5, 10, &
single-door readers - Secure mount to badges, photo ID cards or any smooth
surface - Special batch codes ensure proper operation with these systems -
Nearly indestructible - Ultra high security - Cannot be copied or cloned - Each
chip has a unique internal 64-bit serial number - Use our 33-4323 tape dots to
securely adhere the chips to any desired surface - 0.642" Diameter x 0.126"
Thick (15mm x 2mm)
33-4322 4322 Data Chip - Keytag - Stainless steel keytag with etched Corby logo
- Use with 33-4318, 33-4321 or 33-4331 data chips - Requires 33-4323 tape dot -
Pre-punched hole for affixing to key ring - Custom logos available (S.O.) - 2" x
0.7" (51mm x 18mm)
33-4323 4323 Data Chip - Tape Dots - Use to adhere our 33-4318, 33-4321 or
33-4331 data chips to any desired surface - Acrylic adhesive foam with double
sided peel-off paper - Good for general bonding at elevated temperatures -
Hundreds of uses possible - Provided on a roll of 100 pieces - 0.6" diameter x
0.063" Thick (15mm x 2mm)
33-4324 4324 Data Chip - Plastic Tag Holder - For use with our 33-4331 Thick
Canister Data Chip - Black - Secures the chip without tape or adhesives - Chip
inserts and snaps into the holder - Pre-punched hole for affixing to key ring -
Angled design for easy presentation to reader - Durable and weather resistant -
1.5" W x 0.75" L x 0.25" Thick (19 mm x 38mm x 6mm)
33-4331 4331 Data Chip - Thick Canister - For System 2 or 2000 - Nearly
indestructible - Ultra high security - Cannot be copied or cloned - Each chip
has its own internal and unique 64-bit serial number - Thick-style metal
canister - Use our 33-4323 tape dots to securely adhere the chips to any desired
surface - Fits our 33-4324 Data Chip Tag Holder - Not for use with Systems 1, 4,
5, 10 & single-door readers - 0.642" diameter x 0.188" Thick (16mm x 5mm)
Corby Industries Bar Code Readers
34-4151 4151 Bar Code Card - Use with all Corby systems - Must use swipe reader
34-4160 - Corby graphics on front of the card - CODE 39 bar code and 17-digit
decimal number are printed on rear - Red "anti-copy" shield is printed over the
bar code - Durable & reliable - Credit card size - 2.125" W x 3.375" L x 0.031"
Thick (54mm x 86mm x 1mm)
34-4152 4152 Bar Code Labels - Encoded, self-stick bar code labels - Can be
attached to any card type to add bar code technology - 39 per sheet - Minimum
order: 1 sheet
34-4160 4160 Bar Code Reader - Indoor/Outdoor - Easy vertical or horizontal
surface mount - Durable polycarbonate design - Bi-directional decoding allows
card swiping in either direction - Clock and data format - Use with all Corby
Systems - Reads standard CODE 39 bar code format - Bi-color LED - Reads Corby
Card 34-4151 - Color: Black - 1.7" W x 5.05" L x 1.54" H (43mm x 128mm x 39mm)
35-4073 4073 Magnetic Stripe Card - Plain white - Full-length magnetic stripe
with ABA Track II encoding on rear - Five-digit hot stamped number on each card
represents digits six through ten within the sixteen total numbers encoded -
Works with all Corby systems using the 35-4075 reader - Rugged and long-wearing
design - Non-photo ID - Custom logo and printing available (SO) - Credit card
size - 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm)
35-4074 4074 Magnetic Stripe Card - Use with 35-4075 reader - Corby Logo - ABA
Track II encoding - Five-digit code number hot stamped on card will not wear off
- Rugged long-wearing design - Credit card size - Dimensions: 2.125" W x 3.375"
L x 0.031" Thick (54mm x 86mm x 1mm)
35-4075 4075 Magnetic Stripe Reader - Beige - Indoor/Outdoor - Easy vertical or
horizontal surface mount - Textured powder-coated finish - Treated with
anti-corrosion film - Die cast metal casing - Clock and data format - Use with
all Corby Systems - Reads standard ABA Track II cards - Bright dual LED
indicator - 1.95" W x 5.5" L x 1.3" H (50mm x 140mm x 33mm)
36-4166 4166 Proximity Keyfob - UltraSecure™ 30-Bit - Class H card - Use ONLY
with Class H readers 36-4173, 36-4174, 36-4175, 36-4176 - Durable - Reliable -
Use with Corby Systems 1, 2, 4, 5, 10, & 2000 - 0.9" W x 1.9" L x 0.16" Thick
(23mm x 48mm x 4mm)
36-4167 4167 Proximity Card - UltraSecure™ 30-Bit - Class H card - Use ONLY with
Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 - Use with Corby Systems 1,
2, 4, 5, 10, & 2000 - Non Photo-ID - HID logo - Rugged, long-wearing design -
Pre-punched slot makes it easy to hang from a lanyard or key retractor - Credit
card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4168 4168 Proximity Card - UltraSecure™ 30-Bit - Photo ID - Class H card -
Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 - Accepts most
computer generated images using dye-sublimation process - Use with Corby
Systems1, 2, 4, 5, 10, & 2000 - HID logo - Rugged, long-wearing design - Credit
card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4169 4169 Proximity Micro Tag - 26-Bit - Class H card - Use ONLY with Class H
readers 36-4173, 36-4174, 36-4175, 36-4176 - Use with Corby Systems 2, 4, 5, 10,
& 2000 - Not compatible with Corby System 1 - Self-sticking, small disk-shaped
Lexan transponder - Easy, cost-effective way to turn a plastic ID badge into a
proximity credential - Coin-sized tag attaches to any non-metallic material -
Weight: 0.04 oz (1.18g) - 1.28" x 0.07" (33mm x 2mm)
36-4170 4170 Proximity Keyfob - 26-Bit - Class H card - Use ONLY with Class H
readers 36-4173, 36-4174, 36-4175, 36-4176 - Durable - Reliable - Use with Corby
Systems 2, 4, 5, 10, & 2000 - May also work with other manufacturer's systems -
Not compatible with Corby System 1 - 0.9" W x 1.9" L x 0.16" Thick (23mm x 48mm
x 4mm)
36-4171 4171 Proximity Card - 26 bit - Class H card - Use ONLY with Class H
readers: 36-4173, 36-4174, 36-4175, 36-4176 - Use with Corby Systems 2, 4, 5,
10, & 2000 - Not compatible with Corby System 1 - Non Photo-ID - HID logo -
Rugged long-wearing design - Pre-punched slot makes it easy to hang from a
lanyard or key retractor - Credit card size: 3.385" W x 2.135" L x 0.075" Thick
(86mm x 54mm x 2mm)
36-4172 4172 Proximity Card - 26 bit - Photo ID - Class H card - Use ONLY with
Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 - Accepts most computer
generated images using dye-sublimation process - Use with Corby Systems 2, 4, 5,
10, & 2000 - Not compatible with Corby System 1 - HID logo - Rugged long-wearing
design - Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x
2mm)
36-4173 4173 Proximity Reader - Extended Range - Indoor-Outdoor - Will read most
26 and 30-bit cards from 27" (685mm) under ideal conditions - Use with Class H
cards - Use with Corby Systems 1, 2, 4, 5, 10, & 2000 - May also work with other
manufacturer's systems that accept a generic 26-bit Wiegand input from a reader
- Color: dark gray - 12" W x 12" L x 1" Thick (305mm x 305mm x 25mm)
36-4174 4174 Proximity Reader - Medium Range - Indoor-Outdoor - Will read most
26 and 30-bit cards from 9" (228mm) under ideal conditions - Use with Class H
cards - Use with Corby Systems 1, 2, 4, 5, 10, & 2000 - May also work with other
manufacturer's systems that accept a generic 26-bit Wiegand input from a reader
- Color: dark gray - 5" W x 5" L x 1" Thick (127mm x 127mm x 25mm)
36-4175 4175 Proximity Reader - Thin Line - Indoor-Outdoor - Will read most 26
and 30-bit cards from 4" (101mm) under ideal conditions - Use with Class H cards
- Use with Corby Systems 1, 2, 4, 5, 10, & 2000 - May also work with other
manufacturer's systems that accept a generic 26-bit Wiegand input from a reader
- Color: beige - 4.7" W x 3" L x 0.68" Thick (119mm x 76mm x 17mm)
36-4176 4176 Proximity Reader - Mullion Style - Indoor-Outdoor - Slim-line, fits
most door frames - Will read most 26 and 30-bit cards from 5" (127mm) under
ideal conditions - Use with Class H cards - Use with Corby Systems 1, 2, 4, 5,
10, & 2000 - May also work with other manufacturer's systems that accept a
generic 26-bit Wiegand input from a reader - Color: dark gray - 6" W x 1.7" L x
1" Thick (152mm x 43mm x 25mm)
37-4201 4201 Proximity Reader - Mullion Style - Indoor-Outdoor - Will read most
generic 26-bit cards and 30-bit UltraSecure™ cards up to 4" (102mm) under ideal
conditions - Use with Class F cards - Surface mount - Size fits narrow door
frames - Use with Corby Systems 1, 2, 4, 5, 10 & 2000 - May also work with other
manufacturer's systems - Ivory & black trim plates included - 1.5" W x 3" L x
0.5" Thick (38mm x 76mm x 12mm)
37-4203 4203 Proximity Reader - Single-Gang - Indoor-Outdoor - Will read most
generic 26-bit cards and 30-bit UltraSecure™ cards up to 5" (127mm) under ideal
conditions - Use with Class F cards - Surface mount - Use with Corby Systems 1,
2, 4, 5, 10 & 2000 - May also work with other manufacturer's systems - Ivory &
black trim plates included - 3" W x 4.5" L x 0.38" Thick (76mm x 114mm x 10mm)
37-4204 4204 Proximity Reader - Mid-Range - Indoor-Outdoor - Will read most
generic 26-bit cards and 30-bit UltraSecure™ cards up to 14" (356mm) under ideal
conditions - Use with Class F cards - Surface mount - Use with Corby Systems 1,
2, 4, 5, 10 & 2000 - May also work with other manufacturer's systems - Cost
effective mid-range reader for hands-free performance - Ivory & black trim
plates included - 6" W x 8.5" L x 1" Thick (152mm x 216mm x 25mm)
37-4215 4215 Proximity Card - 26-Bit - Class F card - Use ONLY with any Class F
reader - Durable - Reliable - Works with Corby Systems 2, 4, 5, 10 & 2000 - Not
compatible with Corby System 1 - May also work with other manufacturer's systems
- Pre-punched vertical badge slot - 2.2" W x 3.4" L x 0.06" Thick (55mm x 86mm x
1.5mm)
37-4218 4218 Proximity Keyfob - 26-Bit - Class F card - Use ONLY with any Class
F reader - Durable - Reliable - Works with Corby Systems 2, 4, 5, 10 & 2000 -
Not compatible with Corby System 1 - May also work with other manufacturer's
systems - 1.2" W x 1.5" L x 0.15" Thick (29mm x 36mm x 4mm)
37-4219 4219 Proximity Card - UltraSecure™
30-Bit - Class F card - Use ONLY with any Class F reader - Durable - Reliable -
Works with Corby Systems 1, 2, 4, 5, 10 & 2000 - Pre-punched vertical badge slot
- 2.2" W x 3.4" L x 0.06" Thick (55mm x 86mm x 1.5mm)
37-4220 4220 Proximity Card - UltraSecure™
30-Bit - Photo ID - Class F card - Use ONLY with any Class F reader - Durable -
Reliable - Works with Corby Systems 1, 2, 4, 5, 10 & 2000 - Accepts most
computer generated images using dye-sublimation process - White, glossy finish -
2.12" x 3.38" x 0.031" (54mm x 86mm x 1mm)
37-4222 4222 Proximity Keyfob - UltraSecure™
30-Bit - Class F card - Use ONLY with any Class F reader - Durable - Reliable -
Works with Corby Systems 1, 2, 4, 5, 10 & 2000 - 1.2" W x 1.5" L x 0.15" Thick
(29mm x 36mm x 4mm)
38-4042 4042 Wiegand Reader - Beige - Surface
mount - Indoor & outdoor swipe style - Bi-color LED indication - Use with
Wiegand technology swipe cards - Molded high-impact plastic enclosure - Rugged
and waterproof - Installation finishing decals included - 2.3" W x 5.3" L x 1.7"
H (58mm x 135mm x 43mm)
38-4044 4044 Wiegand Reader - Black - Surface
mount - Indoor & outdoor swipe style - Bi-color LED indication - Use with
Wiegand technology swipe cards - Molded high-impact plastic enclosure - Rugged
and waterproof - Installation finishing decals included - 2.3" W x 5.3" L x 1.7"
H (58mm x 135mm x 43mm)
Corby Industries Wiegand Swipe Cards
38-4045 4045 Wiegand Swipe Card - 26-Bit -
Credit card size - Durable - Works with all Corby systems except System 1 - May
also work with other manufacturer's systems - Use with readers 38-4042 & 38-4044
- 5" W x 3.375" L x 0.037" Thick (43mm x 86mm x 1mm)
38-4049 4049 Wiegand Swipe Card - UltraSecure™
30-Bit - Credit card size - Durable - Reliable - Works with all Corby systems -
Each card has its own unique non-duplicatable number - Use with readers 38-4042
& 38-4044 - 2.125" W x 3.375" L x 0.037" Thick (43mm x 86mm x 1mm)
38-4076 4076 Wiegand Key Token - 26-Bit - Use
only with the 38-4077 Wiegand Sensorkey reader - Works with Corby Systems 2, 4,
5, 10 & 2000 and most other systems that accept the generic 26-bit format - Not
compatible with Corby System 1 - Color: black - 1" W x 3.2" L x 0.92" Thick
(25mm x 83mm x 2.3mm)
38-4077 4077 Wiegand Sensorkey Reader -
Miniature insertion reader - Low profile, in-the-wall reader - 5-12 VDC - Reads
38-4076 & 38-4078 Wiegand key tokens - Color: black - Also available: chrome (S.O.)
- 1.62" L x 1.50" W x 2" D (41mm x 38mm x 51mm)
38-4078 4078 Wiegand Key Token - UltraSecure™
30-Bit - Use only with the Corby 38-4077 Wiegand Sensorkey reader - Works with
Corby Systems 1, 2, 4, 5, 10 & 2000 - Color: black - 1" W x 3.2" L x 0.92" Thick
(25mm x 83mm x 2.3mm)
38-4149 4149 Wiegand Card - UltraSecure™ 30-Bit
- Graphics quality - Both sides printable using dye sublimation process - Use
with readers 38-4042 or 38-4044 - High security 30-bit encoding format works
with all Corby systems - Durable - Reliable - Each card has its own unique non-duplicatable
number - Credit card size - 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x
1mm)
39-4057 4057 Badge Clip - Metal lapel clip with
vinyl snap strap - Ideal for photo ID cards - 25 per pack - 3.5" (89mm)
39-4097 4097 Punch Tool - Heavy-duty hand-held
slot punch tool - Punch vertical or horizontal slots in applicable proximity,
Wiegand, bar code or mag stripe cards - Use with 39-4057 badge clips
Corby Industries Mother Boards
41-1008 1008 System 1 Motherboard - This PCB is
a direct replacement for all versions of the Corby System 1 - It fits into the
current & old style cabinet - This board only outputs a 9600 Baud rate for the
printer or PC - 6.75" W x 5.6" L x 1.2" H (172mm x 142mm x 30mm)
41-2021 2021 System 2 Motherboard - Replacement
for one-door System 2 (22-2003) - Fits into the existing System 2 cabinet and
98-4058 - 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm)
41-2024 2024 System 2 Motherboard - Replacement
for two-door System 2 (22-2016) - Fits into the existing System 2 cabinet and
98-4058 - 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm)
41-2028 2028 System 2000 Control Panel
Motherboard - Replacement for two-door 28-2025 - Fits into the existing System
2000 Control Panel cabinet and 98-4058 - 8" W x 10.5" L x 1.3" H (203mm x 267mm
x 33mm)
41-2030 2030 System 2000 Network Interface Card
- Replacement board for 28-2000 - Fits into the existing NIC cabinet or 98-4059
replacement cabinet - 5.75" W x 6.75" L x 1.3 " H (146mm x 171mm x 33mm)
41-4021 4021 Telecommunications Board -
Daughter board plugs onto the main control board - Allows full RS-232 send &
receive communications with Systems 4, 5, & 10 - Additional RS-232 port for
on-site printer audit trail - Provides RS-232 port for modem and PC
communications for reporting and programming - 2.5" W x 4.3" L x 0.5" H (64mm x
109mm x 13mm)
41-4028 4028 System 4 Motherboard - Master
Control Unit (MCU) - Fits into an existing System 4 steel cabinet or our part
98-4058 - 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm)
41-4029 4029 System 5 Motherboard - Master
Control Unit (MCU) - Replacement board for 25-4000 and 25-4005 - Fits into an
existing System 5 steel cabinet or our part 98-4058 - Does not include 41-4021
telecommunications daughter board - 8" W x 10.5" L x 1" H (203mm x 267mm x 25
mm)
41-4030 4030 System 4 & System 5 Expansion
Board - Slave Control Unit (SCU) - Replacement board for 25-4009 - Fits into an
existing slave control unit steel cabinet or our part 98-4058 - 8" W x 10.5" L x
1" H (203mm x 267mm x 25 mm)
41-4031 4031 System 10 Motherboard - Door Port
Module (DPM) - Replacement board for 26-4405 - Fits into an existing System 10
steel cabinet or our part 98-4058 - 8" W x 10.5" L x 1" H (203mm x 267mm x 25
mm)
51-4100 4100 Video Display Terminal - 14" amber
monochrome screen - 101 key ASCII Keyboard - Controls any device using a RS-232
console connection - Use with systems 1, 2 or 5 with direct connection via
RS-232 cable - Perfect for long term monitoring of systems - NOTE: This is not a
computer and is not capable of performing backup functions - 12.7" W x 13.2" L x
12.3" D (323mm x 335mm x 312mm)
Corby Industries Keypads
52-4012 4012 System Keypad - Outdoor -
Standard-Size Keypad - Surface mount, aluminum housing w/ spring-loaded cover -
Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) -
Includes 4000 Series control board (see 52-4016 for all function specifications)
- Includes a rear-mount sealing gasket - Surface mounts easily on optional
95-0012 & 95-0014 tamper-proof back boxes - 2.8" W x 4.6" L x 0.875" D (71mm x
117mm x 22mm)
52-4014 4014 System Keypad - Hidden View -
Indoor model - Single-gang, surface mount housing - Standard-size keypad - Red
and green 12VDC LEDs (see 81-0043 & 81-0044) - Front tamper switch installed -
Keypad mounted in recessed tray for secure code entry - Includes 4000 Series
control board (see 52-4016 for all function specifications) - 3" W x 4.625" L x
2.8" D ( 76mm x 17mm x 71mm)
52-4016 4016 4000 Series Control Board -
Replacement circuit board - Plugs on rear of all Corby 4000 series keypads
(52-4012 through 52-4066) - Converts keypad decimal output to BCD format - Use
only with Corby Systems 1, 2, 4, 5, 10 & 2000 - Includes two 6" (152mm)
quick-connect wire harnesses - 1.6" W x 2.3" L x 0.5" H (41mm x 58mm x 13mm)
52-4020 4020 System Keypad - Indoor -
Single-Gang - 2 LEDs - Flush mount plate - Standard-size keypad - Red and green
12VDC LEDs (see 81-0043 & 81-0044) - Includes 4000 Series control board (see
52-4016 for all function specifications) - Easily mounted in an optional 95-0011
tamper box - 2.75" W x 4.5" L x 0.4" D (53mm x 40mm x 10m)
52-4064 4064 System Keypad - Lock-Box - Outdoor
model - Large, cast metal heavy-duty keypad - Mounted in a secure, locked
enclosure w/ hinged, vandal-resistant, stainless steel face plate - Red and
green built-in 12VDC LEDs - Includes 4000 Series control board (see 52-4016 for
all function specifications) - Includes lock and key set - Easily mounts on an
optional 97-4061 gooseneck pedestal - 4.75" W x 5.3" L x 5.5" D (120mm x 133mm x
145mm)
52-4066 4066 System Keypad - Outdoor - Large
Heavy-Duty Keypad - Weather-resistant, cast metal mounted in custom plate - Red
and green built-in 12VDC LEDs - Includes 4000 Series control board (see 52-4016
for all function specifications) - Includes a sealing gasket - Surface mounts
easily with an optional 95-0014 tamper-proof back box - 3.23" W x 5" L x 0.4" D
(84mm x 127mm x 10mm)
53-2032 2032 Cable Null Modem - 9-pin female >
9-pin female - For programming System 2 with a PC - Use with 22-2003 or 22-2016
System 2 panels
53-3666 3666 Cable - Custom cable - Use to
connect a 41-4021 telecommunications board to a System 5 PC - 12' (4m)
54-2019 2019 USB > RS232/Serial DB9 Adapter
54-4056 4056 Line Extender Module (LEM) - Use
with any Corby or non-Corby card reader that outputs a Wiegand or clock & data
format - Solves extended wiring run challenges - Each LEM requires 12VDC @ 1.2
amp and extends the output data an additional 500' (152m) - Three are required
for a wire run of 2000' (610m) - An additional 12VDC power supply 92-4094 is
needed every 2000' (610m) - 1.7" W x 3.375" L x 0.562" H (43mm x 86mm x 14mm)
54-4068 4068 Zone Reporter Module (ZRM) -
Provides real time zone monitoring with history reports - Retrofits to Corby
Systems 4, 5, or 10 - Each monitored point is identified as a user code on the
access control system - Follows access system programming as any other user -
Hundreds can be installed on one system - Operates on 12VDC - 2" W x 3.25" L x
0.5" H (51mm x 83mm x 13mm)
54-4141 4141 Reader Interface Module (RIM) -
Enables System 5 or System 10 to use card reader technology - Translates card
reader outputs into a format understood by the system - Works with 26 & 30-bit
Wiegand & proximity as well as bar code and magnetic stripe cards - Reader
connects to RIM and requires a 12VDC @ 1 amp power suppy such as Corby 92-4094 -
Small size allows for mounting inside of system cabinet - 2.3" W x 3.44" L x 1"
H (58mm x 87mm x 25mm)
54-4301 4301 Data Chip Adapter Module - For
Systems 1, 4, 5 or 10 - Enables these legacy systems to use modern data chip
(iButton) technology - Installs between system panel and any read head - Stores
a maximum of 30 different data chip batch numbers - Translates data chip
information into legacy BCD format - Works only with these data chips: 33-4320
and 33-4321 - Requires 12VDC @ 250 ma - 2" W x 3.25" L x 1" H (51mm x 83mm x
25mm)
54-8021 8021 RS-232 to Ethernet Network Adapter
- Works with Systems 1, 2, 5 & 2000 - Allows system programming through a
computer network - Retrofits many other serial-based devices - IP addressable -
Configures with easy web-based interface - Program systems from anywhere in the
world - Extends the range of serial connection to unlimited distances - 0.9" W x
2.5" L x 3.5" H (23mm x 64mm x 114mm)
Corby Industries Modems
55-4118 4118 Short Haul Modem - Extends RS-232
communications up to 1 mile - Use with System 2 and other devices using RS-232
communications and hardware flow control - Direct 4-wire connection eliminates
need for PSTN phone modem - One modem is required on each end of the
communication link - 2.1" W x 3.8" L x 1" H (64mm x 97mm x 25mm)
55-4120 4120 Modem - Use with System 5 control
panel - Establishes communications between System 5 control panel and PC or VDT
- High quality commercial modem - Robust error correction and line filtering -
Requires Corby 55-4121 modem to complete communication - 6.375" W x 10.3" L x
1.337" H (162mm x 261mm x 34mm)
55-4121 4121 Modem - Use with System 5 PC or
VDT - Establishes communications between System 5 PC or VDT and control panel -
High quality commercial modem - Robust error correction and line filtering -
Requires Corby 55-4120 modem to complete communication - 6.375" W x 10.3" L x
1.337" H (162mm x 261mm x 34mm)
55-4122 4122 Communications Kit - Includes
modem and 41-4021 telecommunications board - Use with System 10 DPM -
Establishes communications between System 10 DPM and PC - High quality
commercial modem - Robust error correction and line filtering - Requires Corby
55-4123 modem to complete communication - 6.375" W x 10.3" L x 1.337" H (162mm x
261mm x 34mm)
55-4123 4123 Modem - Use with System 10 PC -
Establishes communications between System 10 PC and DPM - High quality
commercial modem - Robust error correction and line filtering - Requires Corby
55-4122 modem to complete communication - 6.375" W x 10.3" L x 1.337" H (162mm x
261mm x 34mm)
55-4125 4125 Short Haul Modem - Extends RS-232
communications up to 1 mile - Use with Systems 1, 5, 10 or any other device
using RS-232 communications and no flow control - Direct 4-wire connection
eliminates need for PSTN phone modem - One modem is required on each end of the
communication link - 2.1" W x 3.8" L x 1" H (64mm x 97mm x 25mm)
55-4126 4126 Modem - Use with System 1 or 2 PC
or VDT - Establishes communications between System control panel and PC or VDT -
High quality commercial modem - Robust error correction and line filtering -
Requires a second Corby 55-4126 modem to complete communication - 6.375" W x
10.3" L x 1.337" H (162mm x 261mm x 34mm)
55-4127 4127 Modem - Use with System 2000 PC or
NIC - Establishes communications between System 2000 NIC and PC - High quality
commercial modem - Robust error correction and line filtering - Requires a
second Corby 55-4127 modem to complete communication - 6.375" W x 10.3" L x
1.337" H (162mm x 261mm x 34mm)
56-3001 3001 Manual - System 1 - Detailed
instructions and wiring diagrams - Includes Self-help and Troubleshooting
sections - Answers to frequently asked questions
56-3002 3002 Manual - System 2 - Detailed
instructions and wiring diagrams - Includes Self-help and Troubleshooting
sections - Answers to frequently asked questions
56-3003 3003 Manual - System 2000 - NIC -
Detailed instructions and wiring diagrams - Includes Self-help and
Troubleshooting sections - Answers to frequently asked questions
56-3004 3004 Manual - System 4/5 - Detailed
instructions and wiring diagrams - Includes Self-help and Troubleshooting
sections - Answers to frequently asked questions
56-3010 3010 Manual - System 10 - Installation
- Detailed instructions and wiring diagrams - Includes Self-help and
Troubleshooting sections - Answers to frequently asked questions
56-3011 3011 Manual - System 10 - Programming -
Detailed instructions and wiring diagrams - Includes Self-help and
Troubleshooting sections - Answers to frequently asked questions
Corby Industries Printers
57-4006 4006 Printer - Parallel Port - For use
with any PC that has a DB25 parallel port LPT1 connection - Use with Corby
System 10 (26-4450) to generate custom reports - 80-132 column dot matrix - High
speed 240 cps draft - 240 X 216 high resolution - 8 built-in fonts - Tractor or
friction feed - Rear or bottom feed - 9-pin impact prints multi-forms - Black
replacement ribbons available (57-4013) - Ivory - 5.4" W x 17" L x 12.6" D
(136mm x 432mm x 320mm)
57-4007 4007 Printer - Serial Port - Use with
any PC or device that has a DB25 or DB9 RS-232 serial output - Use with Corby
Systems 1, 2 or 5 - Has exact same specifications as Parallel Printer (57-4006)
- Black replacement ribbons available (57-4013) - Ivory - 5.4" W x 17" L x 12.6"
D (136mm x 432mm x 320mm)
57-4013 4013 Printer Cartridge - For 57-4006
parallel printer or 57-4007 serial printer - Package of 4 - Black ink
58-4035 4035 Request to Exit (RTE) Switch -
Heavy-duty - Large illuminated palm button with spring-loaded return -
Multi-element LED lamp rated @ 12VDC provides illumination - Mounted on a
single-gang plate imprinted with "Push to Exit" - One 12VDC green LED (81-0043)
with 6" (152mm) wires attached - Indoor only - Form Z switch consists of one set
of N.O. contacts and one set of N.C. contacts - Faceplate: 2.8" W x 4.5" L x
3.5" D (71mm x 114mm x 89mm) - Button: 1.5" Diameter (38mm)
58-4135 4135 Request to Exit Switch - Large
bright red palm button - Spring-loaded return - Mounted on a single-gang plate
imprinted with "Push To Exit" - One 12VDC green LED with flying leads - Mil Spec
Form Z switch consists of one set of N.O. contacts and one set of N.C. contacts
rated at 10 amps @ 24VDC - Long lasting 25,000 duty cycle - Faceplate: 2.75" W x
4.5" L x 1.7" H (70mm x 114mm x 43mm) - Button: 1.25" Diameter (317 mm)
59-4022 4022 Wire - Plenum - Eight conductor,
22 gauge, shielded, non-twisted pairs, gray - Use for applications requiring low
smoke wiring when installing Systems 1, 2, 4, 5, 10, & 2000 - 0.25" (6mm)
diameter on a spool of 1000' (305m)
59-4023 4023 Wire - Standard - Eight conductor,
22 gauge, shielded, non-twisted pairs, gray - Use with Systems 1, 2, 4, 5, 10, &
2000 - 0.25" (6mm) diameter on a spool of 1000' (305m)
61-2007 2007 System 2 Upgrade - RAM - Use with
22-2003 System 2, single-door system - This upgrade increases the user base to
3432 users with names or 6123 users without names - Easily installed by plugging
into existing socket on circuit board
61-2008 2008 System 2/2000 Upgrade - 3rd RAM -
Use with 22-2016 System 2 or 28-2025 System 2000 - Expands user base to 9,999
users without names - Easily installed by plugging into existing socket on
circuit board
61-2020 2020 System 2 Upgrade - Converts a
one-door System 2 to a two-door System 2 (22-2003 to 22-2016) - Includes large
RAM (61-2007) and EPROM (61-2023) - Installer must call Corby with System
Electronic Serial Number (ESN) to obtain the new activation code
61-2023 2023 System 2 EPROM - 32-pin EPROM
integrated circuit - Plugs into existing socket - Upgrades firmware to current
shipping version
61-2027 2027 System 2 Upgrade - 32-pin EPROM
integrated circuit plugs into existing socket on motherboard - The new firmware
converts an existing two-door System 2 (22-2016) into a System 2000 control
panel (28-2025) - Only compatible with motherboards manufactured after January
01, 1998
61-2029 2029 System 2 Upgrade - 32-pin EPROM
integrated circuit and large RAM plug into existing sockets on motherboard - The
new firmware converts an existing one-door System 2 (22-2003) into a two-door
System 2000 control panel (28-2025) - Only compatible with motherboards
manufactured after January 01, 1998
63-4502 4502 System 4/5 Slave Unit EPROM -
28-pin EPROM integrated circuit - Plugs into existing socket - Upgrades firmware
to current shipping version
63-4504 4504 System 4 EPROM - 28-pin EPROM
integrated circuit - Plugs into existing socket - Upgrades firmware to current
shipping version
63-4505 4505 System 5 EPROM - 28-pin EPROM
integrated circuit - Plugs into existing socket - Upgrades firmware to current
shipping version
63-4510 4510 System 10 EPROM - 28-pin EPROM
integrated circuit - Plugs into existing socket - Upgrades firmware to current
shipping version
63-4511 4511 System 4 and System 4/5 Slave Unit
Upgrade - 28-pin EPROM integrated circuit and 28-pin RAM - Converts System 4 MCU
or System 4/5 Slave SCU (25-4009) to System 5 MCU (25-4000 or 25-4005) - Plug
into existing sockets - Requires 41-4021 telecommunications board
63-4512 4512 System 5 Upgrade - 28-pin EPROM
integrated circuit - Converts System 5 MCU (25-4000 or 25-4005) to System 10 DPM
(26-4405) - Plugs into existing socket
63-4514 4514 System 4 and System 4/5 Slave Unit
Upgrade - 28-pin EPROM integrated circuit and 28-pin RAM - Converts System 4 MCU
or System 4/5 Slave SCU (25-4009) to System 10 DPM (26-4405) - Plug into
existing sockets
63-4515 4515 Smart Socket - 28-pin memory
saving device for System 4 or System 5 MCU - Retains information programmed into
the system if power is lost - Do not use with System 10
71-6500 6500 6500 Series Control Board -
Replacement circuit board - Plugs on rear of all 6500 series keypads (71-6520
through 71-6571) - This tiny circuit board supports 165 users, 3, 4, 5 or 6
digit user code, 18 functions fully programmable from keypad - 2 relay outputs,
2 voltage outputs - Request-to-exit, door ajar, forced entry, time cancel,
panic, code lockout, key beep & alarm sounder - 12VDC or 24VDC - Includes two 6"
(152mm) quick-connect wire harnesses - Can also be used to upgrade existing 7000
series keypads to equivalent 6500 series - 1.6" w x 2.3" L x 0.8" H (41mm x 58mm
x 20mm)
71-6520 6520 Keypad - Single-Door - Indoor -
Single-Gang - 2 LEDs - Flush mount plate - Standard-size keypad - Red and green
12VDC LEDs (see 81-0043 & 81-0044) - Includes 6500 Series control board (see
71-6500 for all function specifications) - Easily mounted in an optional 95-0011
tamper box - 2.75" W x 4.5" L x 1.2" D (40mm x 53mm x 30mm)
71-6521 6521 Keypad - Single-Door - Indoor -
Double-Gang - 2 LEDs - Flush mount plate - Standard-size keypad - Red and green
12VDC LEDs (see 81-0043 & 81-0044) - Includes 6500 Series control board (see
71-6500 for all function specifications) - 4.5" W x 4.56" L x 1.2" D (114mm x
115mm x 30mm)
71-6522 6522 Keypad - Single-Door - Outdoor -
Standard-Size Keypad - Surface mount, aluminum housing w/ spring-loaded cover -
Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) -
Includes 6500 Series control board (see 71-6500 for all function specifications)
- Includes a rear-mount sealing gasket - Surface mounts easily on optional
95-0012 & 95-0014 tamper-proof back boxes - 2.8" W x 4.6" L x 1.76" D (71mm x
117mm x 45mm)
71-6524 6524 Keypad - Single-Door - Hidden View
- Indoor model - Single-gang, surface mount housing - Standard-size keypad - Red
and green 12VDC LEDs (see 81-0043 & 81-0044) - Front tamper switch installed -
Keypad mounted in recessed tray for secure code entry - Includes 6500 Series
control board (see 71-6500 for all function specifications) - 3" W x 4.625" L x
2.8" D (17mm x 76mm x 71mm)
71-6530 6530 Keypad - Single-Door - Indoor -
Single-Gang - 3 LEDs - Flush mount plate - Standard-size keypad - Red, green and
yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) - Includes 6500 Series
control board (see 71-6500 for all function specifications) - Easily mounted in
an optional 95-0011 tamper box - 2.75" W x 4.5" L x 1.2" D (53mm x 40mm x 30mm)
71-6540 6540 Keypad - Single-Door - Indoor -
Single-Gang - 4 LEDs - Flush mount plate - Standard-size keypad - 1 Red, 1 green
and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) - Includes 6500 Series
control board (see 71-6500 for all function specifications) - Easily mounted in
an optional 95-0011 tamper box - 2.75" W x 4.5" L x 1.2" D (53mm x 40mm x 30mm)
71-6564 6564 Keypad - Single-Door - Lock-Box -
Outdoor model - Large, cast metal heavy-duty keypad - Mounted in a secure,
locked enclosure w/ hinged, vandal-resistant, stainless steel face plate - Red
and green built-in 12VDC LEDs - Includes 6500 Series control board (see 71-6500
for all function specifications) - Includes lock and key set - Easily mounts on
an optional 97-4061 gooseneck pedestal - 4.75" W x 5.3" L x 5.5" D (120mm x
133mm x 145mm)
71-6566 6566 Keypad - Single-Door - Outdoor -
Large Heavy-Duty Keypad - Weather-resistant, cast metal mounted in custom plate
- Red and green built-in 12VDC LEDs - Includes 6500 Series control board (see
71-6500 for all function specifications) - Includes a sealing gasket - Surface
mounts easily with an optional 95-0014 tamper-proof back box - 3.23" W x 5" L x
0.4" D (84mm x 127mm x 10mm)
71-6571 6571 Keypad - Single-Door - Indoor -
Double-Gang - 7 LEDs - Flush mount plate with small speaker grill -
Standard-size keypad - 1 Red, 1 green & 5 yellow 12VDC LEDs (see 81-0043,
81-0044 & 81-0045) - Includes 6500 Series control board (see 71-6500 for all
function specifications) - 4.5" W x 4.56" L x 1.2" D (114mm x 115mm x 30mm)
2-7020 7020 Keypad - Single-Door - Indoor -
Single-Gang - 2 LEDs - Flush mount plate - Standard-size keypad - Red and green
12VDC LEDs (see 81-0043 & 81-0044) - Includes 7000 Series control board (see
72-7100 for all function specifications) - Easily mounted in the 95-0011 tamper
box - 2.75" W x 4.5" L x 0.92" D (53mm x 40mm x 24mm)
72-7021 7021 Keypad - Single-Door - Indoor -
Double-Gang - 2 LEDs - Flush mount plate - Standard-size keypad - Red and green
12VDC LEDs (see 81-0043 & 81-0044) - Includes 7000 Series control board (see
72-7100 for all function specifications) - 4.5" W x 4.56" L x 0.92" D (114mm x
115mm x 24mm)
72-7022 7022 Keypad - Single-Door - Outdoor -
Standard-Size Keypad - Surface mount, aluminum housing w/ spring-loaded cover -
Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) -
Includes 7000 Series control board (see 72-7100 for all function specifications)
- Includes a rear-mount sealing gasket - Surface mounts easily on optional
95-0012 & 95-0014 tamper-proof back boxes - 2.8" W x 4.6" L x 1.5" D (71mm x
117mm x 38mm)
72-7024 7024 Keypad - Single-Door - Hidden View
- Indoor model - Single-gang, surface mount housing - Standard-size keypad - Red
and green 12VDC LEDs (see 81-0043 & 81-0044) - Front tamper switch installed -
Keypad mounted in recessed tray for secure code entry - Includes 7000 Series
control board (see 72-7100 for all function specifications) - 3" W x 4.625" L x
2.8" D (17mm x 76mm x 71mm)
72-7030 7030 Keypad - Single-Door - Indoor -
Single-Gang - 3 LEDs - Flush mount plate - Standard-size keypad - Red, green and
yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) - Includes 7000 Series
control board (see 72-7100 for all function specifications) - Easily mounted in
an optional 95-0011 tamper box - 2.75" W x 4.5" L x 0.92" D (53mm x 40mm x 24mm)
72-7040 7040 Keypad - Single-Door - Indoor -
Single-Gang - 4 LEDs - Flush mount plate - Standard-size keypad - 1 Red, 1 green
and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) - Includes 7000 Series
control board (see 72-7100 for all function specifications) - Easily mounted in
an optional 95-0011 tamper box - 2.75" W x 4.5" L x 0.92" D (53mm x 40mm x 24mm)
72-7064 7064 Keypad - Single-Door - Lock-Box -
Outdoor model - Large, cast metal heavy-duty keypad - Mounted in a secure,
locked enclosure w/ hinged, vandal-resistant, stainless steel face plate - Red
and green built-in 12VDC LEDs - Includes 7000 Series control board (see 72-7100
for all function specifications) - Includes lock and key set - Easily mounts on
an optional 97-4061 gooseneck pedestal - 4.75" W x 5.3" L x 5.5" D (120mm x
133mm x 145mm)
72-7066 7066 Keypad - Single-Door - Outdoor -
Large Heavy-Duty Keypad - Weather-resistant, cast metal mounted in custom plate
- Red and green built-in 12VDC LEDs - Includes 7000 Series control board (see
72-7100 for all function specifications) - Includes a sealing gasket - Surface
mounts easily with an optional 95-0014 tamper-proof back box - 3.23" W x 5" L x
0.4" D (84mm x 127mm x 10mm)
72-7071 7071 Keypad - Single-Door - Indoor -
Double-Gang - 7 LEDs - Flush mount plate with pre-punched speaker grill -
Standard-size keypad - 1 Red, 1 green & 5 yellow 12VDC LEDs (see 81-0043,
81-0044 & 81-0045) - Includes 7000 Series control board (see 72-7100 for all
function specifications) - 4.5" W x 4.56" L x 0.92" D (114mm x 115mm x 24mm)
72-7100 7100 7000 Series Control Board -
Replacement circuit board - Normally plugs on rear header of all 7000 series
keypads (72-7020 - 72-7071) - Programs with one 4 or 5 digit user code - 95,040
possible code combinations - 6-24VDC - Board does not include any switching
relays - It has one 350ma solid-state voltage output that operates most alarm
controls plus Corby modules 94-0022, 25, 78 & 86 - Also use any 2 buttons of the
keypad to control up to 7 additional devices using one or more 94-0078 or
94-0086 - 1.6" W x 2.313" L x 0.4" H (41 x 59 x 10mm)
73-7510 7510 Keypad - Platinum Series -
Single-Gang - Surface mount - Supports 200 users - Programmable for 4 to 8-digit
code length - One programmable Form C relay output - Code lockout feature - Add
or delete users directly from the keypad - Operates on 12VDC, 24VDC, or 12VAC -
Vandal and water resistant - Resistant to chemicals and fluids - Scratch
resistant brushed aluminum with anodized finish - 3.2" W x 5.1" L x 0.75" D (81
x 130 x 19mm)
73-7520 7520 Keypad - Platinum Series - Mullion
Size - Surface mount - Supports 200 users - Programmable for 4 to 8-digit code
length - One programmable Form C relay output - Code lockout feature - Add or
delete users directly from keypad - Operates on 12VDC, 24VDC, or 12VAC - Vandal
and water resistant - Resistant to chemicals and fluids - Scratch resistant
brushed aluminum with anodized finish - 1.75" W x 7.125" L x 1" D (45mm x 181mm
x25mm)
73-7530 7530 Keypad - Platinum Series - Mullion
Mortise Size - Recessed mount - Supports 200 users - Programmable for 4 to
8-digit code length - One programmable Form C relay output - Code lockout
feature - Add or delete users directly from keypad - Operates on 12VDC, 24VDC,
or 12VAC - Vandal and water resistant - Resistant to chemicals and fluids -
Scratch resistant brushed aluminum with anodized finish - 1.75" W x 7.125" L x
0.25" D (45mm x 181mm x 6mm)
74-4340 4340 Data Chip Reader - Single-Door -
Indoor - Flush mount - One 12VDC green LED - Standard single-gang aluminum plate
with classic Corby logo - Annodized scuff and scratch resistant finish - Long
lasting read head with 12" (304mm) leads - 74-4345 circuit board for 17 users
included - One relay output - Use with 33-4320 and 33-4321 data chips only -
Supports request-to-exit - 12VDC - Reader: 2.75" W x 4.5" L x 1" Deep (70 mm x
114mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4341 4341 Data Chip Reader - Single-Door -
Indoor - Flush mount - One 12VDC green and one 12VDC red LED - Standard
single-gang aluminum plate with classic Corby logo - Annodized scuff and scratch
resistant finish - Long lasting read head with 12" (304mm) leads - 74-4345
circuit board for 17 users included - One relay output - Use with 33-4320 and
33-4321 data chips only - Supports request-to-exit - 12VDC - Reader: 2.75" W x
4.5" L x 1" Deep (70 mm x 114mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25"
H (41 mm x 64mm x 32mm)
74-4342 4342 Data Chip Reader - Single-Door -
Indoor - Flush mount - One 12VDC green LED - Standard mullion aluminum plate
with classic Corby logo - Anodized scuff and scratch resistant finish - Long
lasting read head with 12" (304mm) leads - 74-4345 circuit board for 17 users
included - One relay output - Use with 33-4320 and 33-4321 data chips only -
Supports request-to-exit - 12VDC - Reader: 1.375" W x 3.125" L x 1" Deep (35mm x
79 mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4343 4343 Data Chip Reader - Single-Door -
Indoor - Flush mount - One 12VDC green and one red LED - Standard mullion
aluminum plate with classic Corby logo - Anodized scuff and scratch resistant
finish - Long lasting read head with 12" (304mm) leads - 74-4345 circuit board
for 17 users included - One relay output - Use with 33-4320 and 33-4321 data
chips only - Supports request-to-exit - 12VDC - Reader: 1.375" W x 3.125" L x 1"
Deep (35mm x 79 mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x
64mm x 32mm)
74-4344 4344 Data Chip Reader - Single-Door -
Indoor/outdoor - Surface mount - One 12VDC bi-color LED - High impact ABS
plastic mullion housing - Virtually indestructible - Long lasting back-lit read
head with 12" (304mm) leads - 74-4345 circuit board for 17 users included - One
relay output - Use with 33-4320 and 33-4321 data chips only - Supports
request-to-exit - 12VDC - Reader: 1.5" W x 4" L x 1" Deep (38mm x 102mm x 25mm),
Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4345 4345 Data Chip Reader - Single-Door -
Motherboard - Replacement board - One relay output for controlling one door - 17
individual users - Programmable for unlimited user mode for lower security
applications - Use with 33-4320 and 33-4321 data chips only - Supports
request-to-exit - Use with all Corby data chip readers - Operates on 12VDC -
2.5" W x 1.6" L x 1.25" H (41 mm x 64mm x 32mm)
81-0043 43 LED - Red - 12-14VDC @ 15ma - Super
bright LED has 6" (152mm) color-coded wires & built-in current limiting resistor
seamlessly molded into a round black plastic body that press fits perfectly into
a 0.166" (4mm) hole - Same as LED used in the 71-6520, 71-6571, 72-7020, etc. -
Ideal for automotive lighting & special projects - 0.160" Diameter x 0.640" L (4
x 16mm) - Submit RFQ for quantity purchase
81-0044 44 LED - Green - 12-14VDC @ 15ma -
Super bright LED has 6" (152mm) color-coded wires & built-in current limiting
resistor seamlessly molded into a round black plastic body that press fits
perfectly into a 0.166" (4mm) hole - Same as LED used in our 71-6520, 71-6571,
72-7020, etc. - Ideal for automotive lighting & special projects - 0.160"
Diameter x 0.640" L (4 x 16mm) - Submit RFQ for quantity purchase
81-0045 45 LED - Yellow - 12-14VDC @ 15ma -
Super bright LED has 6" (152mm) color coded wires & built-in current limiting
resistor seamlessly molded into a round black plastic body that press fits
perfectly into a 0.166" (4mm) hole - Same as LED used in the 71-6520, 71-6571,
72-7020, etc. - Ideal for automotive lighting & special projects - 0.160"
Diameter x 0.640" L (4 x 16mm) - Submit RFQ for quantity purchase
81-0051 51 Bulb - Incandescent - 12-14VDC @
80ma with 6"(152mm) wires - Average life is 30,000 hours - This is the standard
Night Light bulb for Corby products 52-4012 71-6522 72-7022 - Plastic lens cover
& black rubber-mounting ring not included - See item 81-0052 for more info -
0.25" Diameter x 0.313" L (6mm x 8mm) - Submit RFQ for quantity purchase
81-0052 52 Lens - Clear plastic top hat style,
mounts in a rubber bushing that snaps into a 0.35" (9mm) hole - No need for nuts
or washers - Use w/ 81-0051 - Rubber bushing size is 0.28" H x 0.43" W (7mm x
11mm) - Top hat size is 0.26" H x 0.34" W (7mm x 9mm) - Submit RFQ for quantity
purchase
82-0060 60 Keypad - OEM - 12 button - Black
plastic w/white buttons & black numbers - Decimal output on the rear header is
pin 1 common, plus 12 other pins - Gold plated pads, conductive rubber contacts,
silicone gasket - Same as used with Corby 72-7020 and similar models - Mounts
from front in hole size: 2.1" L x 1.6" W (53mm x 40mm) - Header spacing: 0.100"
(3mm) - Keypad: 2.4" L x 1.7" W x .5" H (61mm x 43mm x12mm) - Submit RFQ for
quantity purchase
82-0066 66 Keypad - OEM - 12 button - Extra
heavy-duty - Large, pay telephone type, cast metal buttons - Decimal output on
the rear header is pin 1 common plus 12 other pins - Gold plated pads,
conductive rubber contacts, silicone gasket, water resistant - 2 factory
installed LEDs with 6" (152mm) color-coded wires - 2.4" W x 4" L x .6" H (61mm x
102mm x 15mm) - Submit RFQ for quantity purchase
82-7120 7120 Replacement Keypad - Indoor -
Single-Gang - 2 LEDs - NO control board - keypad only - Replacement keypad for
all Corby 4000, 6500 and 7000 Series units - Flush mount plate - Standard-size
keypad - Red and green 12VDC LEDs (see 81-0043 & 81-0044) - Easily mounted in
the 95-0011 tamper box - 2.75" W x 4.5" L x 0.34" D (53mm x 40mm x 9mm)
82-7121 7121 Replacement Keypad - Indoor -
Double-Gang - 2 LEDs - NO control board - keypad only - Replacement keypad for
all Corby 4000, 6500 and 7000 Series units - Flush mount plate - Standard-size
keypad - Red and green 12VDC LEDs (see 81-0043 & 81-0044) - 4.5" W x 4.56" L x
0.34" D (114mm x 115mm x 9mm)
82-7122 7122 Replacement Keypad - Single-Door -
Outdoor - Standard-Size Keypad - NO control board - keypad only - Replacement
keypad for all Corby 4000, 6500 and 7000 Series units - Surface mount, aluminum
housing w/ spring-loaded cover - Red and green 12VDC LEDs & 12VDC night light w/
lens (see 81-0043,44,51,52) - Includes a rear-mount sealing gasket - Surface
mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes - 2.8" W x
4.6" L x 0.92" D (71mm x 117mm x 24mm)
82-7130 7130 Replacement Keypad - Indoor -
Single-Gang - 3 LEDs - NO control board - keypad only - Replacement keypad for
all Corby 4000, 6500 and 7000 Series units - Flush mount plate - Standard-size
keypad - Red, green and yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) -
Easily mounted in an optional 95-0011 tamper box - 2.75" W x 4.5" L x 0.34" D
(53mm x 40mm x 9mm)
82-7140 7140 Replacement Keypad - Indoor -
Single-Gang - 4 LEDs - NO control board - keypad only - Replacement keypad for
all Corby 4000, 6500 and 7000 Series units - Flush mount plate - Standard-size
keypad - 1 Red, 1 green and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045)
- Easily mounted in an optional 95-0011 tamper box - 2.75" W x 4.5" L x 0.34" D
(53mm x 40mm x 9mm)
82-7171 7171 Replacement Keypad - Indoor -
Double-Gang - 7 LEDs - NO control board - keypad only - Replacement keypad for
all Corby 4000, 6500 and 7000 Series units - Flush mount plate with pre-punched
speaker grill - Standard-size keypad - 1 Red, 1 green & 5 yellow 12VDC LEDs (see
81-0043, 81-0044 & 81-0045) - 4.5" W x 4.56" L x 0.34" D (114mm x 115mm x 9mm)
92-4018 4018 Battery - Gel Cell - 12VDC @ 4 Ah
- Rechargeable - Ideal for retaining the power integrity of access control
panels, keypad circuits, alarm systems or any other low voltage devices -
Replacement battery for Corby Systems 1, 2, 4, 5 & 10 - Same battery as included
in Corby power supply kit 92-4094 - Replace every 3-5 years - 3.5" W x 4" L x
2.75" H (89mm x 102mm x 70mm)
92-4019 4019 Transformer - Primary input is
120VAC, 60 Hz, 48W - Output is 16.5 VAC @ 40 VA - UL listed - Plug-in Class 2
not wet - Wall wart type - Internal green indicator LED - Non-polarized 2 prong
plug w/ secure screw - Two screw terminals for output - Internal non-replaceable
fuse per UL standards - Ivory - 1.9" W x 2.6" L x 3.4" D (66mm x 48mm x 86mm)
92-4093 4093 Power Supply Motherboard -
Selectable 6 or 12VDC @ 1.2 Amp or 24VDC @ 750 mA - Regulated output - 8"
(203mm) battery leads - Automatic switchover to stand-by battery in the event of
power failure - Thermal and short circuit protection with auto reset - AC input
and DC output LED indicators - 92-4019 transformer and 92-4018 battery not
included - Replacement board for Corby 92-4094 power supply - 2.5" W x 3" L x
1.5" H (64mm x 76mm x 38mm)
92-4094 4094 Power Supply - Selectable 6 or
12VDC @ 1.2 Amp - Regulated output - 8" (203mm) battery leads - Automatic
switchover to stand-by battery in the event of power failure - Thermal and short
circuit protection with auto reset - AC input and DC output LED indicators -
Power supply board: 2.5" W x 3" L x 1.5" H (64mm x 76mm x 38mm) - Battery: 3.5"
W x 4" L x 2.75" H (89mm x 102mm x 70mm) - Transformer: 2.65" W x 2.5" L x 3.25"
D (67mm x 64mm x 83mm)
93-5201 5201 Lock - Magnetic - Silver - 650 lbs
(295Kg) holding force - 12VDC / 415mA or 24VDC / 215mA - Mini magnetic holding
device designed for low door clearance or minimum security applications -
Heavy-duty anodized extruded aluminum - Includes mounting brackets for
out-swinging doors & frames - Releases instantly when power is disconnected with
no residual magnetism - Optional Z-bracket 93-5207 for in-swinging door mounting
- Requires 92-4094 power supply - Magnet: 1.625" W x 10" L x 1" H (42mm x 250mm
x 25mm) Armature Plate: 1.5" W x 7.25" L x 0.5" Thick (38mm x 185mm x 12mm)
93-5202 5202 Lock - Magnetic - Brown - 650 lbs
(295Kg) holding force - 12VDC / 415mA or 24VDC / 215mA - Mini magnetic holding
device designed for low door clearance or minimum security applications -
Heavy-duty anodized extruded aluminum - Includes mounting brackets for
out-swinging doors & frames - Releases instantly when power is disconnected with
no residual magnetism - Optional Z- bracket 93-5207 for in-swinging door
mounting - Requires 92-4094 power supply - Magnet: 1.625" W x 10" L x 1" H (42mm
x 250mm x 25mm) Armature Plate: 1.5" W x 7.25" L x 0.5" Thick (38mm x 185mm x
12mm)
93-5203 5203 Lock - Magnetic - Silver - 1300
lbs (590Kg) holding force - 12VDC /415mA or 24VDC / 215mA - Medium-duty holding
device - Heavy-duty anodized extruded aluminum - Includes mounting brackets for
out-swinging doors and frames - Releases instantly when power is disconnected
with no residual magnetism - Optional Z-bracket 93-5208 for in-swinging door
mounting - Requires 92-4094 power supply - Magnet: 2.625" W x 10.5" L x 1.625" H
(68mm x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x
185mm x 16mm)
93-5204 5204 Lock - Magnetic - Brown -1300 lbs
(590Kg) holding force - 12VDC / 415mA or 24VDC / 215 mA - Medium-duty holding
device - Heavy-duty anodized extruded aluminum - Includes mounting brackets for
out-swinging doors and frames - Releases instantly when power is disconnected
with no residual magnetism - Optional Z-bracket 93-5209 for in-swinging door
mounting - Requires 92-4094 power supply - Magnet: 2.625" W x 10.5" L x 1.625" H
(68mm x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x
185mm x 16mm)
93-5205 5205 Lock - Magnetic - Silver - 1500
lbs (675Kg) holding force - 12VDC /415mA or 24VDC / 215mA - Heavy-duty holding
device - Heavy-duty anodized extruded aluminum - Red/green LED indicator
installed in mounting brackets - Use for out-swinging doors and frames -
Releases instantly when power is disconnected with no residual magnetism -
Optional Z- bracket 93-5208 for in-swinging door mounting - Requires 92-4094
power supply - Magnet: 2.625" W x 10.5" L x 1.625" H (68mm x 268mm x 42mm)
Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x 185mm x 16mm)
93-5206 5206 Lock - Magnetic - Brown - 1500 lbs
(675Kg) holding force - 12VDC / 415mA or 24VDC / 215mA - Heavy-duty holding
device - Heavy-duty anodized extruded aluminum - Red/green LED indicator
installed in mounting brackets - Use for out-swinging doors and frames -
Releases instantly when power is disconnected with no residual magnetism -
Optional Z-bracket 93-5209 for in-swinging door mounting - Requires 92-4094
power supply - Magnet: 2.625" W x 10.5" L x 1.625" H (68mm x 268mm x 42mm)
Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x 185mm x 16mm)
93-5207 5207 Z-Bracket - Silver - Converts
93-5201 & 93-5202 to in-swinging door - Includes one adjustable aluminum
Z-bracket, one aluminum L-bracket for the magnet, one steel armature screw, two
zinc-plated steel washers and one rubber washer - Made of heavy-duty anodized
aluminum with counter-sunk mounting holes - Unit is adjustable for easy
installation
93-5208 5208 Z-Bracket - Silver - Converts
93-5203 & 93-5205 to in-swinging door - Includes one adjustable aluminum
Z-bracket, one aluminum L-bracket for the magnet, one steel armature screw, two
zinc-plated steel washers and one rubber washer - Made of heavy-duty anodized
aluminum with counter-sunk mounting holes - Unit is adjustable for easy
installation
93-5209 5209 Z-Bracket - Brown - Converts
93-5204 & 93-5206 to in-swinging door - Includes one adjustable aluminum
Z-bracket, one aluminum L-bracket for the magnet, one steel armature screw, two
zinc-plated steel washers and one rubber washer - Made of heavy-duty anodized
aluminum with counter sunk mounting holes - Unit is adjustable for easy
installation
93-5301 5301 Door Strike - Silver - 12VDC /
685mA - Tamper strength test 1000 lbs (454Kg) - Continuous-duty - Fail-secure -
Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame
doors - Use with mortis or cylindrical locks - Corrosion-resistant case and
moving parts - Reversible and non-handed - Requires 92-4094 power supply - 1.25"
W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5302 5302 Door Strike - Brown - 12VDC /
685mA - Tamper strength test 1000 lbs (454Kg) - Continuous-duty - Fail-secure -
Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame
doors - Use with mortis or cylindrical locks - Corrosion-resistant case and
moving parts - Reversible and non-handed - Requires 92-4094 power supply - 1.25"
W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5303 5303 Door Strike - Silver - 24VDC /
570mA - Tamper strength test 1000 lbs (454Kg) - Continuous-duty - Fail-secure -
Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame
doors - Use with mortis or cylindrical locks - Corrosion-resistant case and
moving parts - Reversible and non-handed - Requires 92-4094 power supply - 1.25"
W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5304 5304 Door Strike - Brown - 24VDC /
570mA - Tamper strength test 1000 lbs (454Kg) - Continuous-duty - Fail-secure -
Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame
doors - Use with mortis or cylindrical locks - Corrosion-resistant case and
moving parts - Reversible and non-handed - Requires 92-4094 power supply - 1.25"
W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
94-0022 22 Latching Relay - Form A with a
single set of latching dry contacts activated by mechanical cam - 12VDC SPST
with 6" (152mm) wires attached - State of relay not affected by power
interruption - On/off dry contact closure for low voltage circuits - Includes
factory installed diode for EMP suppression & double sided tape for easy
mounting - 1.44" W x 1.125" L x 1.31" H (37mm x 29mm x 33mm)
94-0025 25 Momentary Relay - Low current
6-12VDC SPDT Form C rated 3 amps @ 120 VAC with 6" (152mm) wires attached - Only
requires 18ma @ 6VDC & 36ma @ 12VDC to activate - Momentary dry closure for low
voltage circuits - General purpose relay - Includes factory installed diode for
EMP suppression & double-sided tape for easy installation - 0.88" W x 0.63" L x
0.63" H (22mm x 16mm x 16mm)
94-0078 78 Relay Module - Low level, momentary,
SPDT Form C rated @ 1 amp @ 28VDC - 6 - 14VDC operation - Small circuit board
contains relay to activate transistor amplifiers - Quick-connect wire harness -
Sensitive relay only needs 500uA @ 6VDC or 1mA @ 12VDC to activate - Use
positive or negative constant trigger - Use with 7000 series keypad or any other
appropriate device to activate panic or other circuits using any two digits of
keypad - Double-sided mounting tape & hardware - 1.5" W x 2" L x .5" H (38mm x
51mm x 13mm)
94-0086 86 Digital Controller - Programmable
relay for panic, latching, regular & delay timer, zone control - SPDT Form C
rated @ 5 amp @ 24VDC - 6 - 18VDC operation - Quick-connect wire harness - Use
with 7000 series keypad to provide a relay output - The 86 can stand alone in a
low voltage circuit responding to a positive or negative trigger - Delay timer
can be programmed from 1sec.>8.5 min. and can be cascaded for hours - Bypass of
alarm loops, security cameras, delaying sirens & bells, activate doors, shunt
alarm circuits - 1.5" W x 2" L x .75 H (38mm x 51mm x 13mm)
95-0011 11 Tamper Box - Recessed - Single-gang
- Flush mount for old and new work - Easy-mount swing tabs - High impact
lightweight PVC w/ knockouts - Tamper switch w/ SPDT form C contacts &
leaf-style adjustable contact arm & 6" (152mm) wires attached - Use with any
single-gang device except our 52-4012 71-6522 72-7022 - Volume is 14 cubic
inches - 2.25" W x 4.125" L x 2.75" D (57mm x 105mm x 70mm)
95-0012 12 Tamper Box - Surface mount - Front
tamper switch w/SPDT form C contacts & leaf-style adjustable contact arm & 6"
(152mm) wires attached - One rear tamper form A hermetically sealed plunger type
switch with two wires attached - Use with any single-gang device - Box is
single-gang, surface mount, die cast aluminum painted gray with one-half inch
threaded conduit holes (3) - Mounting hardware included (gaskets not included) -
Volume is 25 cubic inches - 2.75" W x 4.5" L x 2" D (70mm x 114mm x 51mm)
95-0014 14 Mounting Box - Surface mount - Heavy
duty 0.045" thick welded steel with gray corrosion proof coating - Form A
hermetically sealed, plunger type, front mounted tamper switch with two 6"
(152mm) wires attached - Use with any single-gang device - Front and rear
sealing gaskets and mounting hardware included - Unit has a 0.875"(22 mm) rear
hole for exit wiring - Volume is 18 cubic inches - 3.31" W x 5.06" L x 1.1" D
(84mm x 129mm x 28mm)
96-4238 4238 AC Surge Protection Device - Four
wide-spaced outlets - Excellent for plug-in transformers such as our 92-4019 -
120VAC 50/60 HZ at 12 amps - Neon status light - External fuse - Surge
protection and noise filtering - Three stages of MOVs - 355 Joule energy
absorption capacity - 40+db noise insertion loss @ 10 MhZ - UL Approved -
Instantaneous response starting at 140 VAC RMS - Meets or exceeds IEEE Std
587-1980 - Enameled steel box - Professional grade - Can be wall mounted -
Includes threaded screw holes for secure installation of transformers - 3.5" W x
17" L x 2.5" H (89mm x 432mm x 64mm)
96-4239 4239 RS-232 Surge Protection Device -
Protects the RS-232 communications port from damage initiated from electrical
irregularities such as static electricity and near lightning strikes -
Bi-directionally protects the 11 most used, important data lines - 10 MOVs -
Less than 1 nanosecond reponse time - Clamping voltage 22 Vp @ 1 ma, 47 Vp @ 5A
- Easy plug-and-play installation - Use on all RS-232 devices - DB25 M > F -
2.125" W x 2.25" L x 0.625" H (54mm x 57mm x 16mm)
96-4240 4240 AC Surge Protection Device -
120VAC 50/60 HZ at 12 amps - Status light - External fuse - Surge protection and
noise filtering - Three stages of MOVs - 355 Joule energy absorption capacity -
40+db noise insertion loss @ 10 MhZ - UL Approved - Instantaneous response
starting at 140VAC RMS - Meets or exceeds IEEE Std. 587-1980 - 2.8" W x 4
97-4060 4060 Mounting Hardware Kit - Use to
mount Wiegand swipe style readers to our 97-4061 - Heavy-duty vandal-resistant
0.074" thick (2mm) rust-proof stainless steel - L-shaped mounting plate and
weather protector - Pre-drilled for mounting - 3" W x 8" L x 5" H x 0.074" Thick
(76mm x 203mm x 127mm x 2mm)
97-4061 4061 Driveway and Gate Pedestal Mount -
40" High (1m) with 11" (279mm) gooseneck reach at 90° angle - Universal mounting
plate easily adapts to Access Control products - Bolt mount includes concrete
base plate and base plate cover - Hollow tube is rugged 2" x 2" (51mm x 51mm)
steel construction - Powder-coated black - Wiegand swipe style readers mount
with our 98-4060 mounting hardware kit - Pedestal: 40" H (1m) Base: 5" x 5"
(127mm x 127mm) Top flange: 3.75" x 3.75" (95mm x 95mm)
98-4058 4058 Steel Cabinet - Large - Ideal for
mounting power supplies, batteries, or other devices - Also replacement cabinet
for Systems 2, 4, 5, 10, & 2000 panel motherboards - Gray - Rear has four
mounting screw holes and four pass-through wire holes 0.8" diameter (20mm) -
Panel sides have five pass-through wire holes 0.8" diameter (20mm) - Includes
lock set and keys - 11" W x 15.5" H x 4.5" Deep x 0.045" Thick (394mm x 280mm x
114mm x 1mm)
98-4059 4059 Steel Cabinet - Small - Ideal for
mounting power supplies, batteries, or other devices - Also replacement cabinet
for System 1 & System 2000 Network Interface Card motherboards - Gray - Rear has
four mounting screw holes and four pass-through wire holes 0.8" diameter (20mm)
- Panel sides have seven pass-through holes 0.8" diameter (20mm) - Includes lock
set and keys - 9" W x 12" H x 4.5" Deep x 0.045" Thick (229mm x 305mm x 114mm x
1mm)
|
