BFT USA, backed by its head office 25 years of
experience, has been distributing in North America, quality CSA/UL approved gate
operators for over 10 years. Since October 2006, BFT U.S., Inc., a wholly owned
subsidiary of BFT S.p.A of Italy, opened an office in Boca Raton, Florida. From
this location where ample stock of all UL/CSA approved electromechanical and
hydraulic operators is stocked, BFT distributes throughout USA, Canada and the
Caribbean Islands. BFT provides technical service and training as well as
developing some local products for the gate market. BFT carries stock of major
products in Southern California to service the west coast of the USA.
BFT Slide Gate Operators
BFT - DEIMOS BT P925186-00002
DEIMOS BT Slide gate operator only 24V
P925186-00002
BFT - DEIMOS BT R925228 00003
DEIMOS BT KIT Slide Kit 24V Rack Drive
R925228 00003
BFT LUX Hydraulic Operator for Swing Gates
LUX 2B UL/CSA P935011 00013
LUX 2B UL/CSA
120 V
up to 660 lb (~300 kg)
up to 10 (3 m)
P935011 00013
LUX FC 2B UL/CSA P935039 00002
LUX FC 2B UL/CSA
120 V
up to 660 lb (~300 kg)
up to 10 (3 m)
LUX R 2B 2SN UL/CSA P935046 00004
LUX R 2B 2SN UL/CSA
120 V
up to 660 lb (~300 kg)
up to 10 (3 m)
P935039 00002
LUX GV2B UL/CSA P935014 00010
LUX GV2B UL/CSA 120 V
up to 700 lb (~320 kg)
up to 15 (4,5 m)
P935014 00010
BFT PHOBOS Series for Electro Mechanical Swing Gates
PHOBOS BT UL/CSA P935069 00001
PHOBOS BT UL/CSA 24V up to 550 lb (~250 kg) up to 10 (3 m)
P935069 00001
PHOBOS BT KIT 1 OPERATOR UL/CSA R935246 00002
PHOBOS BT KIT 1 OPERATOR UL/CSA 24V up to 550 lb (~250 kg) up to 10 (3 m)
R935246 00002
PHOBOS BT KIT 2 OPERATOR UL/CSA R935246 00003
PHOBOS BT KIT 2 OPERATOR UL/CSA 24V up to 10 (3 m)
R935246 00003
PHOBOS BT L P935074 00002
PHOBOS BT L 24V V up to 550 lb (~250 kg) up to 165(5 m) with electric lock
10 (3 m) without electric lock
P935074 00002
PHOBOS BT L KIT 1 OPERATOR R935245 00001
PHOBOS BT L KIT 1 OPERATOR 24V V up to 550 lb (~250 kg) up to 165(5 m) with
electric lock, 10 (3 m) without electric lock
R935245 00001
PHOBOS BT L KIT 2 OPERATORS R935245 00002
PHOBOS BT L KIT 2 OPERATORS
24V
up to 550 lb (~250 kg)
up to 165 (5 m) with electric lock, 10 (3 m) without electric lock
R935245 00002
BFT JOINT Electro Mechanical Operator for Swing Gates
JOINT UL/CSA P935041 00003
JOINT UL/CSA 120 V up to 550 lb (250 kg) up to 10 (3 m)
P935041 00003
BFT JOINT Accessories
ARIES UL/CSA D113198 00001
ARIES UL/CSA Control panel for one or two single phase operators up to 0.4
hp (300 W) each
D113198 00001
RIGEL 5 120 V D113693 00001
RIGEL 5 120 V Control panel for one or two single-phase 120
V operators up to 0.8 hp (600 W) each
D113693 00001
SIBOX N574005
SIBOX Empty safe for external release and control pushbutton
panel.
Dimensions: 7x5x3 1/2
N574005
MOX N733036
MOX External release mechanism for Sibox
N733036
EBP 24 120/24 V P123001 00019
EBP 24 120/24 V 120/24 Vac gravity electric lock
P123001 00019
EBP 120 P123001 00004
EBP 120 120 Vac gravity electric lock
P123001 00004
ME 120 V D111501
ME 120 V 120 V electric lock interface for ECB lock for ARIES UL
and ALCOR UL boards
D111501
ECB SX D121017
ECB SX Left-hand horizontal electric lock. Also available
in right-hand and vertical versions
D121017
BFT Swing Gate Operators
LUX R 2B P925046 00004
LUX R 2B Hydraulic Arm Replacement Hydraulic Arm P925046 00004
Sub G UL/C SA P930010 00007
Sub G UL/C SA 120V 60HZ DX
P930010 00007
PHOBOS BT KIT 2 R935246-00003
PHOBOS BT KIT 2 Swing Dual Kit 24V UL.
R935246-00003
PHOBOS KIT 1R935246 00002
PHOBOS KIT 1 Swing Single Kit 24V. UL
R935246 00002
BFT Control Units
PROXIMA P111326
PROXIMA Handheld programmer for control boards and
receivers compatible with EElink protocol
P111326
UNICAVO D121502
UNICAVO Serial cable for Proxima-PC connection
D121502
ALCOR UL/CSA D113066 00002
Control panel for one or two single phase 120V operators
D113066 00002
ARIES UL/CSA D113198 00001
Control panel for one or two single phase operators
up to 0.4 hp (300 W) each
D113198 00001
RIGEL 5 120 V D113693 00001
Control panel for one or two single-phase 120
V operators up to 0.8 hp (600 W) each
D113693 00001
RIGEL 4 UL/CSA D113236 00003
Control panel for one or two single phase 120V
operators up to 0.5 hp (375 W) each
D113236 00003
KERIG4C002U
Pre-wired 16 x 18 (40 x 45 cm) enclosure box with
RIGEL 4 UL/CSA control board
KERIG4C002U
LIBRA UL R D113701 00001
Universal control panel for one or two 24V motors
with 1 wire limit switch for each motor
D113701 00001
BFT IGEA Electromechanical Operator for Swing Gates
IGEA BT P935070 00002
IGEA BT 24V up to 550 lb (~250 kg) up to 10 (3 m)
P935070 00002
IGEA BT KIT 1 OPERATOR R935229 00003
IGEA BT KIT 1 OPERATOR 24V (~250 kg) up to 10 (3 m)
R935229 00003
IGEA BT KIT 2 OPERATORS R935229 00004
IGEA BT KIT 2 24V (~250 kg) up to 10 (3 m)
R935229 00004
BFT E5 Electromechanical Operator for Swing Gates
E 5 / E5 120 V P930003 00002
E5 / E 5 120V u p to 440 lb (~200 kg) u p to 6 6(2 m)
P930003 00002
BFT ICARO Fast Electromechanical Automation for rack Sliding
Gates
ICARO FAST P925185 00002
ICARO FAST SMART TECHNOLOGY
Incorporated two-channel rolling code radio receiver, plug-in connector for
connection of a second receiver
120 V up to 2200 lb (~1000 Kg)
P925185 00002
ICARO Accessories
SCS 1VP111376
SCS 1 Serial connection interface for QSC D UL, RIGEL 5 and LEO D
P111376
CSP 20 N190040
CSP 20 Shock absorber profile,length 6 6
N190040
CFZ D571054
CFZ 22x22 4mm-pitch galvanized steel rack. 6 6 length
D571054
KI D531548
KI Blank spare key for release Knob
D531548
CSP 10 N190039
CSP 10 Shock absorber profile, length 3 3
N190039
MSC N999158
MSC Personalized key release knob
N999158
CSP 25 N190041
CSP 25 Shock absorber profile, length 8 2
N190041
CVZ D571053
CVZ 30x12 4mm pitch galvanized adjustable steel rack 3 3 length
D571053
18 Teeth Pinion I098425
18 Teeth Pinion Bigger pinion for increased speed (10,5 ips, 16
m/min).
Max gate weight 770 lb (350 kg) (3 piece pack)
I098425
CP D221073
CP 22x22 4mm-pitch plastic rack with adjustment slots.
3 3 length.
US.22
D221073
CLS/52 D610180
CLS/52 Release key for LUX,PHOBOS BT, PHOBOS BT L and DEIMOS BT
D610180
SB BAT P125002
SB BAT 24 Vdc battery backup system for DEIMOS BT, it includes a charger board
that activates the batteries when power is off and charges the batteries when
power is on
P125002
BFT Control Units Accessories
ME 120 V D111501
ME 120 V electric lock interface for ECB lock for ARIES UL and ALCOR UL boards
D111501
.
SCS WIE P111408
SCS WIE Interface for direct connection of wiegand accessories (such as SELETTO,
COMPAS SLIM, etc) to the control units QSC D UL, LIBRA UL R, LEO D, and RIGEL 5
P111408
LA1
LA1 Surge arrestor for
KERIG4C002U and KERIG5C002U
SPL 120 V D113050/110
SPL 120 V Pre-heating board for 1 or 2 LUX, SUB, P4,5-P7 and E5
operators. Can be fitted inside control panels RIGEL 4 UL/CSA, ALCOR UL/CSA
D113050/110
ME BT D111761
ME BT 12/24 Vac electric lock
interface for ECB locks with
BT operators
D111761
SCS P111323
SCS Serial connection interface for LIBRA UL R.
P111323
SSR5 D111704
SSR5 Traffic light and preheating board for RIGEL 5 control panel
D111704
SCS 1 P111376
SCS 1 Serial connection interface for QSC D UL, RIGEL 5 and LEO
DP111376
BFT Radio Controls Receivers
Clonix 2E/128 D113674 00001
Clonix 2E/128 Receiver 2 Channel 433 MHZ
D113674 00001
BFT Radio Controls Transmitters
D111750 Mitto
D111750 Mitto 2 button transmitter
MITTO 4 12V D111751
MITTO 4 12V Four-channel 12 V, rolling code remote control
D111751
RB P121016
RB Four-channel wall radio rolling code remote control
P121016
PR2 D111720 00002
PR2 Two channel wall radio rolling code remote control
D111720 00002
BFT 433 MHz Self-learning rolling-code radio receivers
CLONIX 2/2048 D111664
CLONIX 2/2048 Two-channel rolling code receiver.
D111664
AEL 433 D113632
D113632 - AEL 433
433MHz antenna, 13 cable.
D113632
CLONIX 2 D111662
CLONIX 2 Two-channel rolling code receiver
D111662
BFT 433 MHz Self-learning rolling-code receivers
with built-in display
MOP D111713 00001
Additional radio channel for RTD 2048
D111713 00001
RTD RS N733301 00001
RTD 2048 modem interface
for remote programming.
N733301 00001
RTD 2048 D113670 00002
RTD 2048 External 4 channel (1built-in) rolling code receiver with
built-in LCD display for programming.
D113670 00002
BFT Accessories
P125005 BT
P125005 BT Battery back up for PHOBOS
BFT Operators Parts
Alcor D1130660002
D1130660002 Alcor control board
Aries D11319800001
D11319800001 Aries Control Board 120 V 60 HZ
CPS G N733092
N733092 - CPS G Bearing Foundation Box for SUB G
CP D221073
D221073 CP Plastic rack for DEIMOS Slide (3'-3" Section)
CVZ D57103
D57103 CVZ Steel Rack for DEIMOS Slide (3'-3" Section)
KERIG5C002U
KERIG5C002U Enclosure Box 16x18 with RIGEL 5
KERIG5C003U
Enclosure box 16x18 with RIGEL 5 230 V
KERIG5C003U
BFT Blinkers
PRL P123022
PRL Protective cage for LAMPO
strobe lights
P123022
LAMPO AI 24V D113686 00001
LAMPO AI 24V
24 Vdc strobe light with
integrated antenna
D113686 00001
SLM2 D123013
SLM2 Lampo wall bracket.
D123013
RAY X SA 24V D113721 00003
RAY X SA 24V
24 Vdc strobe light
D113721 00003
LAMPO AI 120 V D113687 00001
120 Vac strobe light with
integrated antenna
D113687 00001
RAY X 24V D113719 00003
RAY X 24V 24 Vdc strobe light with
integrated antenna
D113719 00003
RWS P123023
RWS RAY wall bracket
P123023
BFT Kit Products
DEIMOS BT KIT UL/CSA PHOBOS BT KIT 1 OPERATOR UL/CSA PHOBOS BT KIT 2
OPERATORS UL/CSA
DEIMOS BT KIT UL/CSA R925228 00003
The DEIMOS BT KIT UL/CSA is used to automate sliding gates weighing up to 1100
lb (500 lb) for residential use.
R925228 00003
IGEA BT KIT 1 OPERATOR R935229 00003
The IIGEA BT KIT 1 OPERATOR is used to automate swing gates with leaf length up
to 10 (3 m) and weight up to 440 lb (200 lb), for residential use.
R935229 00003
PHOBOS BT L KIT 1 OPERATOR R935245 00001
The PHOBOS BT L KIT 1 OPERATOR is used to automate swing gates with leaf length
up to 16.4 (5 m) and weight up to 550 lb (250 lb), for
residential use.
R935245 00001
PHOBOS BT L KIT 2 OPERATORS R935245 00002
The PHOBOS BT L KIT 2 OPERATOR is used to automate
swing gates with leaf length up to 16.4 (5 m) and weight up to 550 lb (250 lb),
for residential use.
R935245 00002
PHOBOS L BT KIT 1 OPERATOR PHOBOS L BT KIT 2 OPERATORS IGEA BT KIT 1 OPERATOR
For swing gates with leaf up to 16.4' (5 m) and 550 lb (250 kg) - 24V
functioning For swing gates with leaf up to 16.4' (5 m) and 550 lb (250 kg) -
24V functioning For swing gates with leaf up to 10' (3 m) and 440 lb (200 kg) -
24V functioning
IGEA BT KIT 2 OPERATORS R935229 00004
The IIGEA BT KIT 2 OPERATOR is used to automate swing gates with leaf length up
to 10 (3 m) and weight up to 440 lb (200 lb), for residential use.
R935229 00004
PHOBOS BT KIT 1 OPERATOR UL/CSA R935246 00002
The PHOBOS BT KIT 1 OPERATOR UL/CSA is used to automate swing gates with leaf
length up to 10 (3 m) and weight up to 550 lb (250 lb), for residential use.
R935246 00002
PHOBOS BT KIT 2 OPERATORS UL/CSA R935246 00003
The PHOBOS BT KIT 2 OPERATORS UL/CSA is used to automate
swing gates with leaf length up to 10 (3 m) and weight up to 550 lb (250 lb),
for residential use.
R935246 00003
BFT Electro Mechanical Operator for Road Barriers
Available in two versions, for openings from 10 (3 m) to 166 (5 m) and
speeds from 4 to 8 s.
MOOVI 30 UL/CSA P940026 00004
MOOVI 30 UL/CSA 120V
Boom Length up to 10 (3 m)
P940026 00004
MOOVI 50 UL/CSA P940028 00004
MOOVI 50 UL/CSA 120 V
Boom Length up to 166 (5 m)
BFT Barrier Operator Accessories
N728020
ELL 3 10 FEET (3m) 10 (3 m) boom
N728020
MOOVI ART 90 N728029
MOOVI ART 90 90-degree articulated boom for MOOVI30, 50, Max opening 125
(3.8m)
N728029
KIT MOOVI LIGHT P120001 00001
KIT MOOVI LIGHT Lighting kit for 10 (3m)
booms. To be used in combination with the MOOVI PCA kit
P120001 00001
PCA 6 P120003 00002
PCA 6 Boom upper and lower rubber profile for ELL6
P120003 00002 -
D730088 - FAF
Fixed bar rest fork
ELL 5 N728021
ELL 5 16,5 FEET (5m)
166 (5m) boom
N728021
MOOVI GA D940008
MOOVI GA Movable boom rest rod
D940008
KIT MOOVI LIGHT1 P120001 00002
KIT MOOVI LIGHT1 Lighting kit for 166
(5m) booms. To be used
in combination with the
MOOVI PCA kit
P120001 00002
MOOVI D730251 - CBO
MOOVI Anchor base
D730251 - CBO
BIR N190033
BIR Low-profile rubber edge for barriers and overhead doors
N190033
KIT MOOVI 130 P120002
KIT MOOVI 130 External photocell post kit
P120002
KIT MOOVI PRM P120004
KIT MOOVI PRM Kit to protect hands from shearing
P120004
PCA 3 P120003 00001
PCA 3 Boom upper and lower
rubber profile for ELL3
P120003 00001
SB D573003
SB Boom fence. It cannot be installed on MOOVI 30, for boom length reduction
see table
D573003
PARKY LIGHT D121458
PARKY LIGHT Traffic light
D121458
BFT Obstacle Detection Devices
FL 130B P111043 0000
FL 130B Flat photocell receiver/transmitter set for external
application, range up to 100 (30m) 24V power supply
P111043 00001
CC130/2 P903006
CC130/2 Pair of aluminum posts, for double photocell insertion,
for CELLULA 130 photocells
P903006 -
CMS D831050
CMS UL/CSA warning sign
D831050
PRO 130 V P111081
PRO 130 V Anodized aluminum guard
for CELLULA 130
P111081
CSC 50 P903008
CSC 50 Aluminum post for photocell, mod. CELLULA 50, and mod.
INTRO switch
P903008
PFC 1P903010
PFC Set of two foundation plates
for CC50, CC130, CSC50,
CSC130 and CC130/2 posts
P903010
CC130 P903005
CC130 Pair of aluminum posts for
CELLULA 130 photocells
P903005
CELLULA 130 P111273
CELLULA 130 Flat self-aligning photocell receiver/transmitter set for
external application, range up to 50(15m) 24 VAC/DC power supply
P111273
CSC 130 P903007
CSC 130 Aluminum post for photocell, mod. CELLULA 130, and
mod. INTRO switch, plus CC130 post
P903007
PT 130 P111058
PT 130 Anodized aluminum guard
for FL 130
P111058
BFT Control Device Accessories
ECB DX D121016
ECB DX RH horizontal electric lock
12VD121016
SELETTO E P121013
SELETTO E Wall mounted digital keypad.
It requires serial connection interface, wiegand interface
or COMPASS system
P121013
CRC D531097
CRC Spare coded key for EBP,
JOINT, MOOVI door, PC 2E.
When ordering specify key #
D531097
ECB vertical D121018
ECB Vertical electric lock, 12 V
D121018
EBP 24 120/24 V P123001 00019
EBP 24 120/24 V Vac gravity electric lock
P123001 00019
SELETTO P121012
SELETTO Flush mounted digital Keypad. It requires serial
connection interface wiegand interface or COMPASS system
P121012
INTRO P121011
INTRO Flush mounted key switch
P121011
ECB SX D121017
ECB SX Left-hand horizontal electric lock. Also available in right hand
and vertical versions
D121017
EBP 120 P123001 00004
EBP 120 120 Vac gravity electric lock
P123001 00004
PE2 D121009
PE2 External two-button panel
D121009
PC 2E D113084
PC 2E Wall mounted metal case key switch
D113084
BFT SERIE Control Devices
Multiple application possibility thanks to the broad range of cards managed (up
to 6000) in standalone mode. The wide range of components and accessories makes
it possible to create a product suitable for every need.
SMART TECHNOLOGY. Parameter changes are made without interrupting operation of
the system.
SAFE USE.
Identification of the cards is carried out in an environment kept separate from
the reading environment, thus guaranteeing the systems inaccessibility even if
the card reader is tampered with.
COMPASS 485 D113256
COMPASS 485 Installed inside the protected area, this unit memorizes the
card codes and receives signals from the Compass Slim.
D113256
COMPASS SC 232 D113684
COMPASS SC Stand-alone unit ( no permanent PC connection required)
D113684
COMPASS SC USB D113691
COMPASS SC USB Stand-alone unit ( no permanent PC connection required)
D113691
COMPASS SLIM D113704
COMPASS SLIM Proximity reader for indoor and outdoor use with
compact size and thickness.
D113704
Similar to SECURBASE P111389
SECURBASE PLUS USB LIGHT but also permits management of advanced functions
P111389
MITTO 2T D111453 00001
MITTO 2T Two-channel rolling code transmitter and transponder, incorporated
for reading by a proximity reader.
D111453 00001
COMPASS D110912
COMPASS ISOCARD Proximity card ISO standard.
D110912
SECURBASE LIGHT P111388
SECURBASE LIGHT USB Compass SC remote unit management software.
The software makes it possible to program the Compass SC unit and all
the associated functions completely.
P111388
COMPASS - RING D110914
COMPASS - RING Key holder with incorporated transponder for reading by a
proximity reader.
D110914
RTD CA 2048 D113671 00002
RTD CA 2048 2048 transmitter rolling code receiver and built-in display
for programming.
D113671 00002
MITTO 4T D111454 00001
MITTO 4T Four-channel rolling code transmitter and transponder incorporated
for reading by a proximity reader.
D111454 00001
COMPASS - ISOCARD D110917
COMPASS - ISOCARD PERSONALIZED
On request, card customization, with 1color, minimum quantity to be ordered 100
pcs (including clichιs).
D110917
RTD CA 512 RTD CA 512
RTD CA 512 512 transmitter rolling code receiver with built-in display for
programming.
RTD CA 512
|